Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's above-knee shift dress with princess seams front and back, a wide stand collar with a bow threaded through a loop, short pleated lined sleeves and two welt pockets set into the front panel seams. Drafted to your own measurements. Recommended fabric: dress fabrics from natural or blended fibres.
A women's above-knee shift dress with princess seams front and back, a wide stand collar with a bow threaded through a loop, short pleated lined sleeves and two welt pockets set into the front panel seams.
Silhouette: Shaped close to the body by princess seams from the armholes on the front and back; straight skirt.
Length: Above the knee, hem turned up 2 cm and slip-stitched by hand.
Collar: Wide stand collar cut in one piece, its ends folded in half and sewn to the neckline seam. A narrow loop wraps around the collar at the front, and a separate bow is threaded through it and fixed with a few stitches. The collar ends close at the back with two hooks and eyes.
Sleeves: Short set-in sleeves with pleats at the hem, lined with self fabric; the cap is eased into the armhole.
Front: Centre front panel and side front panels divided into upper and lower parts.
Pockets: Welt pockets in the seam between the upper and lower side front panels, with interfaced folded welts; the pocket bags are caught into the side and princess seams.
Back: Centre back seam with a concealed zipper and a vent at the hem, the vent allowance 6 cm wide; princess seams on both back pieces.
Intermediate. In-seam welt pockets, a back vent, a concealed zipper and a stand collar assembled with a loop and hooks.
Dress fabrics from natural or blended fibres.
If the patterns have a double contour, they include seam allowances; if the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; hem allowance for the dress bottom – 2.0 cm, slit allowance – 6 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
From main fabric:
From fusible interfacing:

#4252
Stretch Dress with Placket and Belt

#4251
Asymmetrical Buttoned Collar Dress Cuffed Sleeves

#4257
V-Neck Cap Sleeve Sheath Dress Floral Rosettes

#4250
Cap Sleeve Peplum Pencil Dress

#4262
Sleeveless High Low Gathered Dress

#4263
Sleeveless Pleated Neck A-Line Dress

#4244
Gathered Neckline Dolman Sleeve Mini Dress
#4264
Belted Color Blocked V-Neck Dress

Minerva Support
Online