Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A hip-length women's top for knit fabric with a crossover V-neck formed by two upper front pieces, gathered into a narrow underbust band. Elbow-length set-in sleeves and a centre back seam. Drafted to your own measurements. Recommended fabric: jersey with medium stretch, of natural or blended fibres.
A hip-length women's top for knit fabric with a crossover V-neck formed by two upper front pieces, gathered into a narrow underbust band. Elbow-length set-in sleeves and a centre back seam.
Silhouette: Fitted at the underbust, slightly flared below to the hip.
Length: Hip length.
Neckline: Deep V-neck formed by the crossed upper fronts, turned to the inside and topstitched.
Front: Two overlapping upper front pieces gathered between marks into an underbust band, which is joined to the one-piece lower front.
Sleeves: Set-in sleeves to about the elbow, hems turned and topstitched.
Back: Centre back seam.
Finishing: Hem and sleeve hems overlocked, turned and topstitched.
Beginner. Gathering, a set-in sleeve and turned edges on knit fabric; no fastenings.
Jersey with medium stretch, of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns do not include seam allowances. Seam allowances: Neckline edges of back and front, bottom edge of garment and sleeve hem – 1.5 cm. All other seam allowances – 0.7 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can range from 90 cm to 150 cm) to determine how much material you will need.
Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.
When stitching pieces, pay attention to the notches - they must match!

Minerva Support
Online