Raglan Hoodie Asymmetrical Button Closure

Name: Raglan Hoodie Asymmetrical Button Closure
Brand: Minerva Patterns
SKU: 4097
Price: 5.00 EUR
Availability: InStock

Pattern #4097

A women's hip-length hoodie in knit fabric, with raglan sleeves, a two-piece hood and an asymmetric buttoned opening along the right raglan seam that continues up the hood. Long cuffs with a thumbhole and a hem band. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres.

Tech. Description

Raglan Hoodie Asymmetrical Button Placket

When To Wear

For walks, travel and weekend wear with leggings or jeans.
As a warm layer over a T-shirt in spring and autumn.

Key Design Features

Silhouette: Close-fitting, shaped by curved seams on the front that join the centre front to a side panel.

Length: Hip length, finished with a folded band sewn into a ring and attached slightly stretched; its seam sits at the left side seam.

Hood: Right and left halves joined by a centre seam, faced, with a topstitched front edge.

Sleeves: Raglan. Side and sleeve seams are sewn in one continuous seam. Double-layer cuffs have a thumbhole turned towards the front.

Closure: The seam between the front and the right sleeve is left open from the neckline and continues up between the hood halves. Buttonholes on the front and left hood, buttons on the right sleeve and right hood; the edges are topstitched.

Pockets: Pocket openings in the curved front seams.

Back: Centre back seam.

Level Of Difficulty

Intermediate. An asymmetric buttoned opening built into a raglan seam and a hood, a faced hood, cuffs with thumbholes and buttonholes on knit fabric.

Fabric Recommendations

Medium-stretch knit fabric of natural or blended fibres.

Additional Supplies

5 buttons

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: All seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. Attention! Markings on patterns are given on the right side.

From main fabric:
- Front – 1 piece
- Side – 1 piece with fold
- Back – 2 pieces
- Placket – 1 piece
- Hood right – 1 piece
- Hood left – 1 piece
- Hood left facing – 1 piece
- Hood right facing – 1 piece
- Sleeve – 2 pieces
- Cuff – 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is stitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

Stitch the center back seam. Finish the allowances and press them to the left side.
Place the pocket and front right sides together and stitch from the bottom to the mark. Turn to the right side. Attach the side to the front from the top to the pocket opening. Finish the allowance and press it towards the front. Stitch the upper edges of the pocket. Finish the allowance.
On the left sleeve, trim the placket allowance and attach it to the front. Finish the allowances. Finish the lower edges of the placket on the right sleeve and front. Attach the right sleeve to the front, ending the stitch at the placket. Finish the allowance. Set the sleeves into the back armhole. Finish the allowances.
Stitch the side seams and sleeve seams in one continuous seam. Finish the allowances.
Fold the cuff in half lengthwise. Stitch sections 1, 2, and 3, leaving two openings. Press the allowances open and flat. Fold the cuff, stitched into a ring, in half. Fold the allowances of the opening inwards and hand-stitch. Attach the cuff to the sleeve, aligning the mark with the sleeve seam and shifting the thumbhole towards the front. Finish the allowance.
Stitch the hood seam. Finish the allowance. Stitch the upper seam of the hood facings. Press the allowances open. Finish the outer edge of the facings. Attach the hood to the neckline. Place the facing on the hood and stitch the front vertical edges. Press the allowances open. Press the placket allowances on the front and sleeve to the wrong side. Turn the facing to the right side and topstitch the hood edge. Attach the lower edge of the facing to the neckline and finish the neckline edge. Topstitch along the front and left hood, simultaneously securing the placket allowance. Topstitch along the sleeve and right hood, simultaneously securing the placket allowance.
Stitch the placket into a ring. Fold in half lengthwise and attach, slightly stretching the placket. The seam is located near the left side seam. Finish the allowance.
On the front and left hood, make buttonholes; on the right side, sew on buttons.