Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's dress in medium- to high-stretch knit with a shirt collar on a stand, a short buttoned front placket edged with gathered ruffles and short sleeves gathered at the crown and finished with cuffs. Drafted to your own measurements. Recommended fabric: knit fabric of medium or high stretch, of natural or blended fibres.
A women's dress in medium- to high-stretch knit with a shirt collar on a stand, a short buttoned front placket edged with gathered ruffles and short sleeves gathered at the crown and finished with cuffs.
Silhouette: Semi-fitted and straight, with bust darts on the front.
Collar: Shirt collar set into a separate stand; the upper stand is interfaced, and collar and stand are topstitched.
Front: Front cut in one piece on the fold, with a short placket opening at the centre. Both placket strips are interfaced, folded in half and topstitched 0.1 cm from the seam; buttonholes on the right placket, buttons on the left.
Finishing: Two gathered ruffles, their outer edges finished with a rolled hem, are sewn into the placket seams on each side. Hem overlocked, turned up and topstitched; a twin needle keeps the stretch.
Sleeves: Short set-in sleeves gathered at the crown between marks, finished with folded cuffs.
Back: Two pieces with a centre back seam.
Intermediate. A placket with ruffles sewn into it, a collar on a stand, gathered set-in sleeves with cuffs and buttonholes in knit fabric.
Knit fabric of medium or high stretch, of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem of the garment – 1.5 cm. Other allowances – 0.8 cm. Outer edge of the Ruche – 0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From fusible interfacing:
Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.

#4030
Asymmetric Crossover Pleated Belted Dress

#4029
Cowl Neck Ruched Dress

#4028
Asymmetrical Panel Belted Sheath Dress

#4034
Gathered Dolman Sleeve Keyhole Neck Dress

#4027
Sunburst Pleat Sheath Dress

#4026
Cap Sleeve Shift Dress with Shoulder Tabs and Pockets

#4036
Fitted Two-Tone Square Neck Dress

#4023
Sheath Dress with Pleated Cap Sleeves

Minerva Support
Online