Fabric & Materials
Fabric recommendations: dense fabrics made of natural or blended fibers, artificial or genuine leather. Also needed: fusible interfacing; lining fabric; zipper; 4 rings; 2 zippers for internal pockets; decorative cord; 2 buckles.
CUTTER'S MUST
If the patterns have a double contour, they include SEAM ALLOWANCES. If the contour is single, the patterns do not include SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1cm. Seam allowance for the upper edge of the divider pocket is 2 cm. ATTENTION! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).
- From main fabric:
- Main part – 4 pieces
- Strap – 2 pieces
- Bottom – 1 piece
- Facing – 2 pieces
- Ring holder – 4 pieces
- From lining fabric:
- Lining – 2 pieces
- Large pocket lining – 1 piece
- Small pocket lining – 1 piece
- Divider pocket – 2 pieces
- From FUSIBLE INTERFACING:
- Center part, facing, bottom, strap.
Sewing Instructions
When stitching pieces, pay attention to the NOTCHES - they must match!
- Interface the center part, facing, bottom, and strap with fusible interfacing.
- Stitch the side edges of the facing.
- Mark the pocket placement on the lining. Cut an opening along the pocket entrance, make diagonal cuts 1 – 1.5 cm from the end of the pocket. Fold the seam allowances inwards. Place the zipper under the edges of the pocket opening so that the teeth are visible. Topstitch the pocket opening at 0.2 cm from the edge. Attach the large pocket lining to the upper zipper tape, and the small one to the lower tape. Stitch the edges of the lining.
- Cut zipper flaps from lining fabric, 4 cm long and 2 cm wide. Fold the seam allowance of the upper edge of the divider pocket to the wrong side, turn inwards, and topstitch. Fold the flaps in half crosswise, place them on the zipper from both sides. Place the divider pocket pieces on the zipper so that the lining does not cover the zipper teeth and topstitch.
- Stitch the side and bottom edges of the lining, inserting the divider pocket. Leave an opening in one of the side seams for subsequent turning. Stitch the corners of the lining.
- Fold the ring holder in half lengthwise, right sides together, and stitch along the long edge. Turn the holder right side out and fold in half crosswise.
- Stitch the center edges of the main parts. Fold the seam allowance to the side and topstitch at 0.5 cm from the seam.
- Stitch the side edges of the bag. Insert the bottom into the bag.
- Place the facing and lining right sides together. Insert the zipper between the facing and the bag. Stitch the zipper strictly from mark to mark, clipping the seam allowances near the mark. Stitch across the zipper, catching the seam allowances of the facing and lining.
- Insert the bottom of the lining into the bag lining, clipping at the corners.
- Place the lining and bag right sides together. Insert the ring holders, having threaded the rings beforehand. Stitch along the upper edge. Turn the bag through the opening. Topstitch along the upper edge at 0.2 cm from the edge.
- Fold the strap lengthwise, right sides together, and stitch along the long edge. Turn the strap right side out and press. Topstitch at 0.2 cm from the edge. Thread the ends of the strap through the rings, fold under the seam allowance, and topstitch. Stitch the opening closed. Decorate the bag with a decorative cord and buckles.
