Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A sleeveless, fitted women's sheath dress of knee length, with armhole princess seams front and back, an asymmetric mock-wrap front with a V-neckline and two decorative buttons, and a concealed zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.
A sleeveless, fitted women's sheath dress of knee length, with armhole princess seams front and back, an asymmetric mock-wrap front with a V-neckline and two decorative buttons, and a concealed zipper at the centre back.
Silhouette: Fitted, shaped by princess seams running from the armholes on the front and back.
Length: Knee length.
Neckline: Deep V on the front formed by the overlapping fronts; round back neckline.
Front: Separate right and left centre fronts, each with its own interfaced facing. The right front laps over the left along a diagonal edge and is topstitched to it from the neckline to a lower mark; below the mark the edge is left free down to the hem. Neckline and right front edge topstitched 0.1 cm from the edge.
Closure: Concealed zipper in the centre back seam. The two buttons on the right front are decorative.
Sleeves: Sleeveless; armholes finished with a 4 cm bias strip folded in half and turned to the inside.
Back: Centre back seam and two princess seams; interfaced back neck facings secured to the zipper tape.
Finishing: 2 cm hem turned up and topstitched.
Intermediate. Princess seams, an asymmetric faced front lapped and topstitched in place, a concealed zipper with facings, and bias-bound armholes.
Dress fabrics of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; garment hem allowance – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match! Attention! The inscriptions on the patterns are made on the right side!
From main fabric:
From fusible interfacing:
Before starting, print the paper pattern pieces and lay them out on the fabric width (fabric width may range from 90 cm to 150 cm) to determine the required amount of material. Do not forget to consider paired and symmetrical pieces.
When sewing, pay attention to the notches — they must match.
Note: Markings on the pattern pieces are made on the right side.

#2876
Fitted Tweed Pinafore Dress
#2881
Collared Dress with Cuffs and Back Zip
#2874
Long Sleeve Pointed Collar Diagonal Seam Dress

#2882
Fit-and-Flare Dress with Folded Neck Tab
#2883
Sleeveless Princess Seam Diagonal Button Dress
#2872
Buttoned Shirt Dress with Patch Pockets and Belt

#2885
Colorblock Sheath Dress with Contour Panel Seams

#2870
Cap Sleeve Draped Waist Sheath Dress

Minerva Support
Online