Pattern

Fabric & Materials

Fabric recommendations: knit fabric with low stretch from natural or blended fibers (e.g., French terry). IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, THE PATTERNS ARE WITHOUT SEAM ALLOWANCES. SEAM ALLOWANCES: hem allowance – 2 cm. All other seams 1 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

CUTTER'S MUST

• From main fabric:
  • Center back – 1 piece on fold
  • Side back – 2 pieces
  • Center front – 1 piece on fold
  • Side front – 2 pieces
  • Sleeve — 2 pieces
  • Cuff – 2 pieces
  • Collar – 1 piece

Tip: For the collar and cuffs, you can use ready-made knit ribbing. Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.

Sewing Instructions

1. Stitch shoulder seams, press allowances towards the back and serge.
2. Attach side front and back pieces to the sleeve. Serge allowances and press towards the sleeve. Topstitch 0.5 cm from the seam.
3. Fold and secure pleats on the sleeve cap. Attach side pieces and sleeves to the front and back. Serge allowances and press towards the center of the front and back respectively. Topstitch 0.5 cm from the seam.
4. Stitch the collar into a loop, press allowances open. Fold the collar in half lengthwise and attach to the neckline, stretching it slightly. Press allowances towards the main piece and serge.
5. Stitch side seams simultaneously with the sleeve seam. Serge allowances and press towards the back.
6. Stitch the cuff into a loop, press allowances open. Fold the cuff in half lengthwise and attach to the bottom of the sleeve, stretching it slightly. Press allowances towards the sleeve and serge.
7. Serge the bottom edge of the garment, press to the wrong side and topstitch.