Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's above-knee A-line dress with short set-in sleeves, front and back yokes, princess seams on the bodice, a waist seam and two large patch pockets with curved, bias-bound openings. Seams are topstitched in the manner of denim. Drafted to your own measurements. Recommended fabric: denim from natural or blended fibres.
A women's above-knee A-line dress with short set-in sleeves, front and back yokes, princess seams on the bodice, a waist seam and two large patch pockets with curved, bias-bound openings. Seams are topstitched in the manner of denim.
Silhouette: Fitted bodice with princess seams, A-line skirt shaped by darts.
Length: Above the knee.
Neckline: Round, finished with interfaced front and back facings.
Sleeves: Short, one-piece, set-in.
Front: Centre front seam with double topstitching at 0.1 cm and 0.7 cm. The upper front has a yoke and princess seams; the lower front is joined at the waist and has darts.
Pockets: Two patch pockets on the lower front, topstitched on with a double row at 0.1 cm and 0.7 cm. The curved openings on the side are bound with folded bias strips and stabilised with fusible tape.
Back: Same structure as the front: yoke, princess seams, waist seam, darts in the lower back and a centre back seam.
Closure: Concealed zipper at the top of the centre back seam.
Finishing: Princess seams and darts topstitched at 0.1 cm; yoke seams double-topstitched at 0.1 cm and 0.7 cm; 2 cm hems on dress and sleeves.
Intermediate. Many panels to match at yoke and waist seams, accurate double topstitching on denim, bias-bound pocket openings and a concealed zipper.
Denim from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: all seams 1 cm; hem allowance for the dress bottom and sleeve bottom — 2 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
From main fabric:
From fusible interfacing:

#2762
Collared Button Front Midi Dress
#2765
Panelled Sleeveless Flounce Dress

#2767
Sleeveless Paneled Dress with Side Buttons
#2751
Slit Neck Color Blocked Dress with Tie Belt
#2750
Pencil Dress Round Collar Double Breasted
#2771
Front Ruffle Shirt-Dress

#2772
Button-Front Gathered Midi Shirtdress

#2774
Blazer Dress Asymmetric Pleated Hem

Minerva Support
Online