Fitted Asymmetrical Crossover Vest

Name: Fitted Asymmetrical Crossover Vest
Brand: Minerva Patterns
SKU: 2756
Price: 5.00 EUR
Availability: InStock

Pattern #2756

A fitted women's vest with an asymmetrical crossover front closing with 4 buttons on the side, a V-neck, two double-welt pockets and darts on the front and back. Armholes bound with bias binding. Drafted to your own measurements. Recommended fabric: firm dress fabrics of natural or blended fibres.

Tech. Description

Fitted Asymmetrical Crossover Vest

A fitted women's vest with an asymmetrical crossover front closing with 4 buttons on the side, a V-neck, two double-welt pockets and darts on the front and back. Armholes bound with bias binding.

When To Wear

Over a shirt or a thin top with trousers for the office.
On its own on warm days, as a sleeveless top with a skirt or trousers.

Key Design Features

Silhouette: Fitted, shaped with darts on the fronts and the back.

Length: To the hip, the front edge ending in a point at the hem.

Neckline: Deep V-neck, finished with a back neck facing and front facings.

Closure: The right front crosses over to the left side and fastens with 4 buttons placed along the diagonal front edge; an inner button holds the under layer.

Pockets: Double-welt (framed) pockets on both fronts, with interfaced welts and a two-part pocket bag.

Back: Centre back seam and darts.

Sleeves: Sleeveless; armholes finished with a 4 cm bias binding turned to the inside and topstitched.

Finishing: Hem turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Double-welt pockets, an asymmetrical faced front edge with a sharp lower corner, bias-bound armholes, buttonholes.

Fabric Recommendations

Firm dress fabrics of natural or blended fibres.

Additional Supplies

Fusible interfacing (back neck facing, front facings, pocket welts)
4 buttons and 1 inner button
Bias binding 4 cm wide (or cut from the main fabric)

Cutter's Must

If the patterns have a double contour, the patterns include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance – 2 cm; other seams – 1 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to consider paired and symmetrical parts). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Back – 2 pieces
- Front – 2 pieces
- Back Neckline Facing – 1 piece
- Center Front Facing – 2 pieces
- Pocket Frame – 4 pieces
- Bigger Pocket Bag – 2 pieces
- Smaller Pocket Bag – 2 pieces
From fusible interfacing:
- Back Neckline Facing – 1 piece
- Center Front Facing – 2 pieces
- Pocket Frame – 4 pieces

Sewing Instructions

Fuse interfacing to the Back Neckline Facing, Center Front Facings and Pocket Frames.
Stitch the darts on the Back pieces, press the dart intakes towards the center. Stitch the center back seam, press allowances to the left side and overlock.
Stitch the darts on the Front pieces, trim the dart intakes to 1 cm, press towards the center and overlock.
Mark the pocket placement on the Front. Fold the Pocket Frames in half wrong sides together and press. Mark a stitching guideline on each Pocket Frame parallel to the fold. Stitch the Bigger Pocket Bag to the upper frame. Stitch the frames to the Front. Cut the Front in the middle between the frame stitching lines. Make diagonal cuts 1-1.5 cm from the end of the pocket. Turn the frames through the opening to the wrong side, straighten the edges, adjust the ends of the frames so that the pressed folds of the frames meet flush. Secure the pocket corners from the wrong side with a double backstitch at the base of the corners. Stitch the Smaller Pocket Bag into the seam of the lower frame. Stitch the pocket bag edges together and overlock.
Stitch shoulder seams, press allowances towards the back and overlock.
Stitch the shoulder seams of the Back Neckline Facing and Center Front Facings, press the allowances open. Overlock the outer edge. Place the facings on the garment right sides together and stitch the neckline, front edge and lower corner. Clip the allowances, trim the corners, turn the facings to the wrong side and press. Hand-tack the Back Neckline Facing to the center back seam and the facings to the shoulder seams.
Cut (or use ready-made) bias binding 4 cm wide and a length equal to armhole length + 4 cm. Fold the bias binding in half lengthwise right side out and press. Place the binding on the right side of the armhole, raw edges aligned, and stitch. Fold the binding to the wrong side, clip the allowances and topstitch along the fold onto the main piece. Press the seam.
Stitch side seams, press allowances towards the back and overlock.
Overlock the bottom edge of the garment, press to the wrong side and topstitch.
Make buttonholes on the right front, sew buttons on the left. Make an inner buttonhole on the left front, sew on the inner button.