Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#2729
#2731

Sleeveless Button Front Blouse Wide Collar

Pattern #2730

A sleeveless women's blouse, semi-fitted to the hip, with princess seams on the front and back, a V-neckline under a wide flat collar with square front corners, and a six-button front opening. Drafted to your own measurements. Recommended fabric: blouse fabrics from natural or blended fibres.

Tech. Description

Sleeveless Button Front Blouse Wide Collar

A sleeveless women's blouse, semi-fitted to the hip, with princess seams on the front and back, a V-neckline under a wide flat collar with square front corners, and a six-button front opening.

When To Wear

  • On its own in summer, with skirts or trousers.
  • Under a jacket or cardigan at the office, with the collar laid over the lapels.

Key Design Features

Silhouette: Semi-fitted, shaped by princess seams running the full length of the front and back.

Length: Hip length.

Collar: Wide flat collar that lies over the shoulders, with square front ends and a centre back seam; upper and lower collar are each sewn from two halves and interfaced.

Neckline: V-neckline, finished with front facings joined to a back neckline facing.

Closure: Centre front button opening, buttonholes on the right front, six buttons.

Back: Centre back panel cut on the fold, with two side back panels.

Finishing: Armholes bound with a folded bias strip turned to the inside and topstitched; hem double-turned 1 cm and 1 cm and topstitched.

Level Of Difficulty

Intermediate. Princess seams, a two-layer collar set between the blouse and the facings, bias-bound armholes and buttonholes.

Fabric Recommendations

Blouse fabrics from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (collar, front facings, back neckline facing)
  • 6 buttons
  • Bias binding for the armholes (or cut from the main fabric)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: Hem allowance – 2 cm; other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces).

  • From main fabric:
    • Center back – 1 piece on fold
    • Side back – 2 pieces
    • Center front – 2 pieces
    • Side front – 2 pieces
    • Collar – 4 pieces
    • Front facing – 2 pieces
    • Back neckline facing – 1 piece
  • From fusible interfacing:
    • Collar – 2 pieces
    • Front facing – 2 pieces
    • Back neckline facing – 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Fuse interfacing to the designated pieces.
  2. Stitch the back princess seams, press allowances towards the center and serge. Stitch the front princess seams, press allowances towards the center and serge.
  3. Stitch shoulder seams, press allowances towards the back and serge.
  4. Stitch collar pieces in pairs, press allowances open. Place the upper collar and lower collar right sides together and stitch the ends and outer edge. Clip allowances, trim corners, turn collar right side out, shape and press. Attach collar to neckline.
  5. Stitch and press open shoulder seams of back neckline facing and front facings. Serge the outer edge. Place front facings with back neckline facing on the right side of the front, right side down, and stitch the front edges and neckline (collar is positioned between the pieces). Clip allowances at curves, turn facings right side out, shape, and press.
  6. Cut (if not ready-made) bias binding 4 cm wide and length equal to armhole length + 4 cm. Fold bias binding in half lengthwise, right side out, and press. Place binding on armhole edge right side up and stitch. Clip allowances. Fold binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
  7. Stitch side seams, press allowances towards the back and serge.
  8. Fold the bottom hem inwards by 1 cm, then another 1 cm, and topstitch.
  9. On the right front, make buttonholes; on the left front, sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?