Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted short-sleeved blouse with a shirt collar on a stand, a centre front placket stitched closed with no buttons, a pleated bow across the front below the bust and a hidden zip in the left side seam. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.
A women's fitted short-sleeved blouse with a shirt collar on a stand, a centre front placket stitched closed with no buttons, a pleated bow across the front below the bust and a hidden zip in the left side seam.
Silhouette: Fitted: bust and waist darts on the fronts, princess seams on the back.
Collar: Shirt collar with pointed ends, topstitched 0.5 cm from the edge, set into a two-layer stand; collar and stand interfaced.
Sleeves: Short set-in sleeves with one underarm seam.
Front: Two fronts with an interfaced centre front placket. The right front is lapped over the left and stitched to it, stopping 10 cm below the top, so there are no buttons or buttonholes.
Closure: Hidden zip in the left side seam.
Back: Back yoke, centre back seam and princess seams (centre back and side back pieces).
Finishing: A horizontal bow placket, folded and stitched along its lower edge, is basted onto the front; the bow, folded and turned, is laid over it in random pleats and held at the centre by a loop strap. Hems of the body and sleeves turned up 1.5 cm and topstitched.
Intermediate. Collar on a stand, a turned front placket, a hidden zip in the side seam, darts, a yoke and princess seams, and an assembled bow.
Blouse fabrics of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the bottom edge of the garment and sleeve – 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
From main fabric:
From fusible interfacing:

#2691
Cropped Balloon Sleeve Blouse

#2695
Stand Collar Sleeveless Layered Blouse
#2698
Collared Wrap Front Peplum Blouse
#2685
Blouse With Asymmetrical Front Ruffle
#2701
Keyhole Neck Puff Sleeve Blouse
#2702
V-Neck Back V Flutter Blouse
#2683
Pussy Bow Bishop Sleeve Blouse
#2704
Stand Collar V-neck Cold Shoulder Blouse

Minerva Support
Online