Notched V-Neck Blouse Waistband Short Sleeve

Name: Notched V-Neck Blouse Waistband Short Sleeve
Brand: Minerva Patterns
SKU: 2429
Price: 5.00 EUR
Availability: InStock

Pattern #2429

A women's short-sleeved blouse, ending at the hip, with a V-neck finished by a stand collar, princess seams on the upper front and back, and an inset waistband that divides the bodice from the lower part. Six-button front. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.

Tech. Description

Notched V-Neck Blouse Waistband Short Sleeve

When To Wear

At the office in summer with a pencil skirt or straight trousers.
Under an open jacket in spring and autumn.

Key Design Features

Silhouette: Fitted at the waist by the inset band and princess seams, hip length.

Collar: Two-piece stand collar set into the V-neckline, stopping short of the front edges; the front edges and neckline are finished with facings.

Sleeves: Short set-in sleeves with one seam, hem turned up 1.5 cm.

Front: Upper front in two parts joined by a princess seam from the shoulder, a front waistband and a lower front; six buttons with buttonholes on the right front.

Back: Centre back seam through the upper and lower back, princess seams from the shoulders, and a one-piece back waistband.

Finishing: Seam allowances overlocked; front facings and back neckline facing interfaced; hem turned up 1.5 cm and topstitched.

Level Of Difficulty

Intermediate. Princess seams, an inset waistband matched across the front opening, a stand collar set between the blouse and the facings, buttonholes.

Fabric Recommendations

Blouse fabrics of natural or blended fibres.

Additional Supplies

Fusible interfacing (front facings, back neckline facing, stand collar)
6 buttons

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm. Hem allowance for the garment bottom edge and sleeve hem – 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Upper Center Back – 2 pieces
- Upper Side Back – 2 pieces
- Back Waistband – 1 piece
- Lower Back – 2 pieces
- Upper Center Front – 2 pieces
- Upper Side Front – 2 pieces
- Front Waistband – 2 pieces
- Lower Front – 2 pieces
- Sleeve – 2 pieces
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
- Stand Collar – 2 pieces
From fusible interfacing:
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
- Stand Collar – 1 piece

Sewing Instructions

Fuse interfacing to the designated pieces.
Stitch the princess seams joining the Upper Center Back and Upper Side Back. Overlock allowances and press towards the center. Stitch the center back seams of the upper back and the Lower Back. Overlock allowances and press to the left side. Stitch the Back Waistband to the upper back. Overlock allowance and press onto the waistband. Stitch the Lower Back to the waistband, overlock allowance and press onto the waistband.
Stitch the princess seams joining the Upper Center Front and Upper Side Front. Overlock allowances and press towards the center. Stitch the Front Waistband to the upper front. Overlock allowance and press onto the waistband. Stitch the Lower Front to the waistband, overlock allowance and press onto the waistband.
Stitch shoulder and side seams. Overlock allowances and press towards the back.
Place the two Stand Collar pieces right sides together and stitch the outer edge. Clip allowances, turn right side out and press. Baste the collar to the neckline.
Stitch the shoulder seams of the Center Front Facings and Back Neckline Facing. Press allowances open. Overlock the outer edge. Place the facings right sides together with the garment (the collar between them) and stitch the front edges and the neckline edge of the back and front. Clip allowances at curves, trim at corners, turn the facings to the wrong side, straighten, press. Secure to the garment at shoulder seams.
Stitch the sleeve seam. Overlock allowance and press towards the back of the sleeve. Set sleeves into armholes. Overlock allowances and press.
Overlock the bottom edge of the garment and sleeves, press to the wrong side and topstitch.
Make buttonholes on the right front and sew buttons onto the left front.