Fabric & Materials
Fabric recommendations: dress fabrics made of natural or blended fibers in contrasting or related colors. YOU WILL ALSO NEED: a concealed zipper; fusible interfacing; 2 buttons. IF THE PATTERNS HAVE A DOUBLE CONTOUR, THE PATTERNS INCLUDE SEAM ALLOWANCES; IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm. Hem allowance for the bottom edge of the garment and the bottom edge of the sleeve – 2.5 cm. ATTENTION! FIRST OF ALL, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical details).
CUTTER'S MUST
- From main fabric:
- Back – 2 pieces
- Upper front part - 1 piece
- Lower front part right – 1 piece
- Lower front part left - 1 piece
- Sleeve – 2 pieces
- Front facing for lower front part – 1 piece
- Neckline facing for front – 1 piece
- Neckline facing for back – 2 pieces
- From main fabric 1:
- Inner panel – 1 piece
- Sleeve insert – 2 pieces
- From fusible interfacing:
- Front facing for lower front part – 1 piece
- Neckline facing for front – 1 piece
- Neckline facing for back – 2 pieces
Sewing Instructions
WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH! Attention! Markings on the patterns are made on the right side!
- Fuse interfacing to the designated pieces.
- Stitch darts on back and front pieces, press waist dart depths towards the center, bust darts upwards.
- Serge the center back seam separately on each piece. Stitch the center back seam from the zipper mark to the bottom. Press seam allowances open, pressing the slit. Insert the concealed zipper.
- Serge the outer edge of the lower front facing. Place the facing and the lower right front piece right sides together and stitch the upper edge, vertical and shaped edge. Clip seam allowances at curves and at the mark, trim at corners. Turn the facing to the wrong side, straighten, press.
- Serge the bottom edge of the inner panel, press to the wrong side and topstitch. Place the inner panel and the facing right sides together and stitch. Press and serge seam allowances. Stitch the inner panel to the lower left front piece, press and serge seam allowances. Topstitch the seam allowance of the lower left front piece onto the main piece.
- Stitch the upper and lower front pieces, press seam allowances upwards and serge.
- Stitch side and shoulder seams, press seam allowances towards the back and serge.
- Stitch shoulder seams of neckline facings, press seam allowances open, serge the outer edge. Place the dress and facing right sides together and stitch the neckline edge. Clip seam allowances at curves, turn the facing to the wrong side and press. Secure the facing to the shoulder seams and zipper tape.
- Serge the bottom edge of the sleeve insert, press to the wrong side and topstitch. Attach the insert to the sleeve, press and serge seam allowances. Topstitch the sleeve seam allowances in the lower part onto the main piece.
- Serge the bottom edge of the garment, press to the wrong side and topstitch.
- Sew buttons onto the right front panel, securing it to the left panel.
