Zipper Front Peplum Jacket

Name: Zipper Front Peplum Jacket
Brand: Minerva Patterns
SKU: 2400
Price: 5.00 EUR
Availability: InStock

Pattern #2400

A fitted women's jacket at hip length with a round collarless neckline, an edge-to-edge front closed by a separating zipper set between the front and the facing, a horizontal waist seam and a pleated peplum. Long two-piece sleeves. Drafted to your own measurements. Recommended fabric: lightweight suiting fabrics in natural or blended fibres.

Tech. Description

Zipper Front Peplum Jacket

When To Wear

In spring and early autumn over a blouse, a fitted top or a sheath dress.
For the office with a straight skirt or slim trousers.

Key Design Features

Silhouette: Close-fitting bodice shaped by darts, with a peplum flaring from the waist seam.

Length: Hip length.

Neckline: Round, collarless, finished with front facings and a back neck facing.

Sleeves: Long set-in two-piece sleeves with elbow and front seams; 3 cm hem.

Front: Upper front shaped with darts. Lower front peplum with pleats laid in at the waist seam, opening at the centre front.

Closure: Separating zipper stitched between the front edge and the facing at the centre front, from the neckline to the hem.

Back: Upper back in two pieces with a centre back seam, shoulder darts and waist darts; lower back cut in one piece on the fold.

Finishing: Hem and sleeve hems of 3 cm, interfaced, overlocked and topstitched.

Level Of Difficulty

Intermediate. Setting a separating zipper between the jacket and the facing, a waist seam with pleats, and two-piece set-in sleeves.

Fabric Recommendations

Lightweight suiting fabrics in natural or blended fibres.

Additional Supplies

Fusible interfacing (front facings, back neck facing, hem allowances of the jacket and sleeves)
Separating zipper

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the garment bottom and sleeve bottom - 3 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Upper back – 2 pieces
- Lower back – 1 piece on fold
- Lower front – 2 pieces
- Upper front – 2 pieces
- Front facing — 2 pieces
- Back neckline facing – 1 piece
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
From fusible interfacing:
- Front facing — 2 pieces
- Back neckline facing – 1 piece

Sewing Instructions

Fuse interfacing to the corresponding pieces and the hem allowances of the garment bottom and sleeves.
Stitch shoulder and waist darts on the upper back parts, press dart depths towards the center. Stitch the center back seam, press allowances to the left side and overlock. Stitch the upper and lower back parts, press allowances upwards and overlock.
Stitch darts on the front, trim dart depths to 1 cm, press towards the center and overlock. Lay and secure pleats on the lower front parts. Stitch the upper and lower front parts, press allowances upwards and overlock.
Stitch shoulder and side seams, press allowances towards the back and overlock.
Stitch and press open the shoulder seams of the back neckline facing and front facings. Overlock the outer edge. Place front facings and facing with the garment right sides together, insert the separable zipper between the pieces and stitch the front edge, neckline, and lower corner. Clip allowances at corners, slash at curves. Turn facings to the right side, straighten seams, and press.
Stitch the elbow and front sleeve seams, press allowances and overlock. Set sleeves into armholes according to notches, press allowances and overlock.
Overlock the bottom edge of the garment and sleeves, press to the wrong side and topstitch.