Hooded Raglan Sleeve Sweatshirt

Name: Hooded Raglan Sleeve Sweatshirt
Brand: Minerva Patterns
SKU: 2358
Price: 5.00 EUR
Availability: InStock

Pattern #2358

A hip-length women's hooded sweatshirt for knit fabric, with long raglan sleeves, a three-piece hood with a drawcord casing, a front pocket with slanted openings, and rib cuffs and hem band. Drafted to your own measurements. Recommended fabric: low-stretch knit fabric made from natural or blended fibres; rib knit or a high-stretch knit for the cuffs and hem band.

Tech. Description

Hooded Raglan Sleeve Sweatshirt

A hip-length women's hooded sweatshirt for knit fabric, with long raglan sleeves, a three-piece hood with a drawcord casing, a front pocket with slanted openings, and rib cuffs and hem band.

When To Wear

In autumn and spring with jeans, joggers or leggings.
For walks, travel and wear at home.

Key Design Features

Silhouette: Loose fit, gathered in at the wrists and hips by the rib bands.

Length: Hip length, finished with a folded band stitched into a ring, its seam placed under the left side seam.

Collar: Hood of two side pieces cut on the fold and a centre panel; a hood facing stitched along the front edge forms the casing, and the cord comes out through two buttonholes and is finished with cord tips.

Sleeves: Raglan, long, with folded rib cuffs stitched on while slightly stretched. Sleeve and side seams are sewn in one pass.

Pockets: One front pocket with cut-on opening facings, stitched on along the upper marking line, turned down and topstitched along the sides.

Back: One piece cut on the fold.

Finishing: Elastic or narrow zigzag stitch, overlocked allowances trimmed to 0.6–0.8 cm; topstitched hems with a twin needle.

Level Of Difficulty

Beginner. Raglan seams, a patch-type pocket, rib bands and a hood with a facing casing, all on knit fabric.

Fabric Recommendations

Low-stretch knit fabric made from natural or blended fibres; rib knit or a high-stretch knit for the cuffs and hem band.

Additional Supplies

Rib knit or high-stretch knit (cuffs, hem band)
Decorative cord
Cord tips

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams - 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:
- Back - 1 piece on fold
- Front – 1 piece on fold
- Sleeve — 2 pieces
- Pocket - 1 piece
- Hood - 1 piece on fold
- Center hood piece - 1 piece
- Hood facing – 1 piece
From main fabric 1:
- Bottom facing – 1 piece
- Cuff – 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.

Serge the edge of the one-piece pocket opening facing. Press the pocket opening facing to the wrong side and topstitch. Serge the pocket sides. Press the side and bottom edges to the wrong side. Place the pocket on the front, right sides together, along the upper pocket marking line (the lower edge of the pocket is directed towards the neckline) and stitch. Turn the pocket down. Topstitch the pocket to the front along the side edges.
Stitch the sleeve to the back, press seam allowances towards the sleeve and serge. Stitch the sleeve to the front, press seam allowances towards the sleeve and serge.
Stitch the sleeve seam simultaneously with the side seam, press seam allowances towards the back and serge.
Stitch the center piece to the hood pieces, press seam allowances towards the center piece and serge. Serge the buttonholes for the cord. Stitch the hood into the neckline, press seam allowances and serge.
Serge the inner edge of the hood facing. Place the facing on the hood, right sides together, and stitch the outer edge. Clip seam allowances at curves, turn the facing to the wrong side, and press. Topstitch the facing to the hood, forming a casing.
Stitch the cuff into a loop, press seam allowances open. Fold the cuff in half lengthwise, right side out, and press. Stitch the cuff to the bottom of the sleeve, stretching slightly. Press seam allowances and serge.
Stitch the bottom facing into a loop, press seam allowances open. Fold the facing in half lengthwise, right side out, and press. Stitch the facing to the bottom of the garment, placing the seam under the left side seam and stretching slightly. Press seam allowances and serge.
Thread the cord through the hood, secure the cord ends.