Gathered Blouse Raglan Puff Sleeves

Name: Gathered Blouse Raglan Puff Sleeves
Brand: Minerva Patterns
SKU: 2349
Price: 5.00 EUR
Availability: InStock

Pattern #2349

A hip-length women's blouse with raglan puff sleeves, the neckline gathered all round into a narrow stand collar, and a buttoned front placket. The sleeves are gathered into buttoned cuffs below the elbow. Drafted to your own measurements. Recommended fabric: blouse fabrics made from natural or blended fibres.

Tech. Description

Gathered Blouse Raglan Puff Sleeves

When To Wear

In spring and summer with trousers, jeans or a straight skirt.
Under a cardigan or a sleeveless jacket in cooler weather; the stand collar sits close to the neck.

Key Design Features

Silhouette: Loose, straight fit with fullness gathered at the neckline on the front, back and sleeves.

Length: Hip length, straight hem.

Collar: Narrow stand cut in two pieces, interfaced, with a buttonhole at the front.

Sleeves: Raglan, three-quarter length, gathered at the top and at the hem into cuffs. Each sleeve has a slit finished with a self-fabric bias strip.

Front: Two fronts with separate interfaced plackets; buttonholes on the right placket, buttons on the left.

Back: One piece cut on the fold, gathered at the neckline.

Finishing: Seams serged; side seams and sleeve seams stitched in one pass; hem serged, pressed under and topstitched.

Level Of Difficulty

Intermediate. Setting gathered raglan sleeves, attaching a stand collar to a gathered neckline, sewing plackets, binding a sleeve slit and attaching buttoned cuffs.

Fabric Recommendations

Blouse fabrics made from natural or blended fibres.

Additional Supplies

Fusible interfacing (cuffs, collar stand, plackets)
9 buttons

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm. Hem allowance for the bottom edge of the garment – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Back - 1 piece on fold
- Front – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- Collar stand — 2 pieces
- Placket – 2 pieces
From fusible interfacing:
- Cuff – 2 pieces
- Collar stand – 1 piece
- Placket – 2 pieces

Sewing Instructions

Fuse interfacing to the designated pieces.
Place collar stand pieces right sides together and stitch along the outer contour. Start and end the stitching precisely at the marked seam line for attachment. Clip seam allowances at curves. Turn the finished collar stand right side out and press.
Press the placket lengthwise in half, right side out. Stitch the outer side of the placket to the front, press seam allowances towards the placket. Fold under the raw edge of the inner placket and topstitch into the attachment seam.
Make a slit on the sleeve along the marked line. Cut a bias strip from the main fabric, 4 cm wide and a length equal to double the slit length + 4 cm. Fold the bias strip lengthwise in half and press. Press the outer seam allowances towards the center. Finish the sleeve slit with the bias strip.
Attach sleeves to the back, press seam allowances towards the back and serge. Attach sleeves to the front, press seam allowances towards the front and serge.
Along the upper edge of the front, back, and sleeve, stitch with a loosened upper thread and gather.
Attach the outer of the collar stand to the neckline, press seam allowances towards the collar stand. Fold under the raw edge of the inner collar stand and topstitch into the attachment seam.
Stitch the side seams simultaneously with the sleeve seam. Serge seam allowances and press towards the back.
Place cuff pieces right sides together and stitch the side edges. Start and end the stitching precisely at the marked seam line for cuff attachment. Turn the piece right side out, press. Along the bottom edge of the sleeve, stitch with a loosened thread and gather. Attach the outer side of the cuff to the sleeve, fold under the raw edge of the inner cuff and topstitch into the attachment seam of the outer cuff.
Serge the bottom edge of the garment. Press seam allowances to the wrong side and topstitch.
Make buttonholes on the cuffs, sew on buttons. Make buttonholes on the right placket and collar stand. Sew buttons on the left side of the placket and collar stand.