Notch Neck Rolled Sleeve Top

Name: Notch Neck Rolled Sleeve Top
Brand: Minerva Patterns
SKU: 2338
Price: 5.00 EUR
Availability: InStock

Pattern #2338

A women's loose top with extended shoulders, short sleeves finished with folded cuffs, a round neckline with a small centre front notch, and a curved hem that is longer at the back. Drafted to your own measurements. Recommended fabric: dress or blouse fabrics in natural or blended fibres.

Tech. Description

Notch-Neck Rolled-Sleeve Top

A women's loose top with extended shoulders, short sleeves finished with folded cuffs, a round neckline with a small centre front notch, and a curved hem that is longer at the back.

When To Wear

Summer days, tucked loosely or worn out over jeans, trousers or a skirt.
Under a jacket at the office in spring and autumn.

Key Design Features

Silhouette: Loose, straight body, with the front and back each cut in one piece on the fold.

Length: Hip length; the back hem is curved and drops lower than the front.

Neckline: Round neckline with a notch at the centre front, finished with a double-layer interfaced band that is stitched in and topstitched 0.5 cm from the seam.

Sleeves: Short sleeves cut in one with the body; the armhole edge is finished with a cuff joined into a ring and folded in half.

Finishing: Hem overlocked, turned up 1.2 cm and topstitched.

Level Of Difficulty

Beginner. Two main pieces, straight seams, a neckline band with a small notch and folded cuffs.

Fabric Recommendations

Dress or blouse fabrics in natural or blended fibres.

Additional Supplies

Fusible interfacing (neckline band)

Cutter's Must

Seam allowances: all seams 1 cm. Hem allowance – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Back – 1 piece on fold
- Front - 1 piece on fold
- Cuff - 2 pieces
- Neckline facing - 2 pieces
From fusible interfacing:
- Neckline facing – 2 pieces

Sewing Instructions

Reinforce facing pieces with fusible interfacing.
Stitch side and shoulder seams, press allowances towards the back and serge.
Stitch shoulder seams of back and front neckline facings in pairs, press allowances open. Fold facings right sides together and stitch the outer and front edges. Clip allowances at curves, trim at corners, turn piece right side out, straighten, press.
Attach facing to the neckline, press allowances towards the main garment, serge and topstitch 0.5 cm from the attachment seam.
Stitch cuff piece into a ring, press allowances open. Fold cuff in half lengthwise, right side out, and attach to the armhole, placing pieces right sides together. Serge allowances, press.
Serge the bottom edge of the garment, press to the wrong side and topstitch.