Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#2214
#2216

Colorblock Blouse

Pattern #2215

A women's hip-length blouse with front and back yokes, princess seams and centre panels cut from a second fabric, so a contrasting band runs down the front and back. The round neckline is bound with bias and closes at the back with a button and rouleau loop. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres, in two colours or textures for the main pieces and the centre panels.

Tech. Description

Colorblock Blouse

A women's hip-length blouse with front and back yokes, princess seams and centre panels cut from a second fabric, so a contrasting band runs down the front and back. The round neckline is bound with bias and closes at the back with a button and rouleau loop.

When To Wear

  • At work with straight trousers or a pencil skirt.
  • For everyday wear in spring and autumn, tucked in or worn loose.

Key Design Features

Silhouette: Straight, loose fit.

Length: Hip length.

Neckline: Round neckline finished with a 4 cm bias binding turned to the inside and topstitched along the fold.

Sleeves: Set-in sleeves, about three-quarter length, with a topstitched hem.

Front: One-piece front yoke; below it a centre panel cut on the fold from the contrast fabric between two side panels joined by princess seams.

Back: Two-piece back yoke with a short centre back opening; centre panel cut on the fold from the contrast fabric between two side panels.

Closure: One button on the right back yoke and a rouleau loop on the left.

Finishing: Princess seam allowances pressed towards the centre, yoke seams pressed onto the yoke; hems turned up 1.5 cm and topstitched.

Level Of Difficulty

Beginner. Straight princess and yoke seams, bias-bound neckline and a rouleau loop; no darts, collar or zipper.

Fabric Recommendations

Blouse fabrics of natural or blended fibres, in two colours or textures for the main pieces and the centre panels.

Additional Supplies

  • Second fabric for the centre front and back panels
  • 1 button

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: hem allowance for the garment and sleeve hem – 1.5 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

  • From main fabric:
    • Back yoke — 2 pieces
    • Back side – 2 pieces
    • Front yoke – 1 piece
    • Front side — 2 pieces
    • Sleeve – 2 pieces
  • From main fabric1:
    • Back central – 1 piece with fold
    • Front central — 1 piece with fold

Sewing Instructions

  1. Serge the center edges of the back yoke separately, press towards the wrong side. Stitch a reinforcing line 0.1 cm from the edge of the slit.
  2. Stitch the back princess seams. Serge the allowances and press towards the center. Attach the back yokes to the back, press the allowances towards the yoke and serge.
  3. Stitch the front princess seams, press the allowances towards the center and serge. Attach the front yoke to the front. Serge the allowance and press towards the yoke.
  4. Stitch the side and shoulder seams, press the allowances towards the back and serge.
  5. Cut a bias strip 2.5 cm wide and 5 cm long for the rouleau loop. Fold the strip lengthwise in half, right sides together, and stitch 0.3 cm from the fold. Trim the allowances close to the stitching, turn the strip right side out and shape the rouleau. Adjust the loop length.
  6. Cut a bias binding 4 cm wide and a length equal to the neckline length + 4 cm. Fold the bias binding in half lengthwise, right sides out, and press. Place the binding with the neckline edge on the right side, extending the tails, and face. Fold the binding to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam. Attach the loop to the left back yoke.
  7. Stitch the sleeve seam, serge the allowances and press towards the back. Set the sleeves into the armholes, press the allowances and serge.
  8. Serge the bottom edge of the garment and sleeves, press towards the wrong side and topstitch.
  9. Sew the button onto the right back yoke.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?