Pattern

Fabric & Materials

Fabric recommendations: dress fabrics made of natural or blended fibers with added elastane. YOU WILL ALSO NEED: a concealed zipper, fusible interfacing.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm; hem allowance for the blouse bottom and sleeve – 2.0 cm. ATTENTION! FIRST OF ALL, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH! ATTENTION! Markings on the patterns are made on the right side.

• From main fabric:
  • Back - 2 pieces
  • Right front part – 1 piece
  • Left front part – 1 piece
  • Side front part – 1 piece
  • Back collar part – 2 pieces
  • Right collar part – 2 pieces
  • Left collar part – 2 pieces
  • Sleeve - 2 pieces
• From fusible interfacing:
  • Back collar part – 1 piece
  • Right collar part – 1 piece
  • Left collar part – 1 piece

Sewing Instructions

1. Interface the pieces with fusible interfacing.
2. Stitch the darts on the back pieces. Press the darts towards the center seam.
3. Serge the center edges of the back separately. Stitch the center back seam from the neckline to the first mark and from the second mark to the bottom. Press the center seam allowances open. Insert the concealed zipper.
4. Stitch the shoulder seams of the collar pieces, press the allowances open. Place the upper and lower collar right sides together and stitch the outer edge. Clip the allowances, turn the collar right side out, straighten, and press.
5. Form and secure the pleats on the right front part (pleat depths facing downwards). Stitch the shoulder seams, press the allowances towards the back and serge.
6. Stitch the lower collar to the neckline, press the allowances towards the collar. Turn the lower edge of the upper collar inwards and topstitch into the seam of the lower collar attachment. Fold the left collar part onto the front, serge the lower edge of the left front part together with the collar. Overlap the right front onto the left and topstitch into the collar attachment seam.
7. Fold the right collar part in half, align the fold with the mark, and secure the collar along the relief with the front. Stitch the side front part to the right front, press the allowances towards the side and serge.
8. Stitch the side seams, press the allowances towards the back and serge.
9. Stitch the sleeve seam, press the allowances towards the back of the sleeve and serge. Set the sleeves into the armholes, matching notches and easing the cap. Press and serge the allowances.
10. Serge the hem allowance of the blouse bottom and sleeve, press to the wrong side and hem with blind stitches.