Flounced Tulle Stole with Integrated Sleeves

Name: Flounced Tulle Stole with Integrated Sleeves
Brand: Minerva Patterns
SKU: 2002
Price: 5.00 EUR
Availability: InStock

Pattern #2002

A women's tulle stole that crosses the upper back and shoulders and falls in two long ends at the front, with small cut-on sleeves, double tulle flounces along the long edges and lace trim over every flounce seam. Drafted to your own measurements. Recommended fabric: tulle for the stole and both flounces.

Tech. Description

Flounced Tulle Stole with Integrated Sleeves

When To Wear

Over a strapless or sleeveless wedding dress, to cover the shoulders during the ceremony.
With an evening gown at a formal reception.

Key Design Features

Silhouette: A band across the back and shoulders that continues into two long hanging ends at the front.

Sleeves: Small sleeves cut in one with the stole, closed with an inner seam up to the marks; their lower edges carry a flounce covered with lace trim.

Finishing: Two square flounces, a large and a small one, are slit along the cut line; the small flounce is laid on the large one and both are sewn by their inner circle to the edges of the stole, with the ends left free. Flounces are sewn only along the long edges of the stole. The seams are covered with topstitched lace trim, which is hand-embroidered with beads.

Level Of Difficulty

Intermediate. Circular flounces cut from squares, two flounce layers sewn together to sheer tulle, lace trim topstitched over the seams and beading by hand.

Fabric Recommendations

Tulle for the stole and both flounces.

Additional Supplies

Lace trim, about 6 m
Beads for hand embroidery on the lace trim

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: All allowances - 1 cm (except for flounce patterns). Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width should be at least 140 cm) to determine how much material you will need.

From tulle:
- Stole with integrated sleeves
- Large and small square flounces
Lace trim: Sewn onto the finished stole and hand-embroidered with beads.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! Try to observe the grain line direction.

The large and small square flounces are cut along the "cut" line. Then the small flounce is placed on the large one and stitched together with the raw edges of the stole (the flounces are sewn to the stole along their inner diameter - the ends remain free - see photo). The flounces are only stitched along the long edges of the stole.
The stitching edges are covered with a topstitched lace trim (you will need approximately 6 m of it).
The flounces are also stitched onto the lower edges of the sleeves, which are then covered with lace trim. The sleeves are sewn up to the marks with an internal seam.