Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#2001

Tailored Barrel-Leg Pants with Front Pleats and Curved Side Panels

Pattern #1650

A high-rise trouser with a sculpted barrel leg: two front pleats on each side, curved front and back side panels that shape the leg into a soft rounded volume, and a narrow hem. The shape comes from the cut, not from gathers, so the pants hold their silhouette in a crisp twill or a classic indigo denim. Sizes XS–2XL (US 2–24): every size as A0, A4, US Letter, One Page and Projector PDF files with seam allowances, plus an illustrated sewing booklet.

Tech. Description

Tailored Barrel-Leg Pants with Front Pleats and Curved Side Panels

A high-rise trouser with a sculpted barrel leg: two front pleats on each side, curved front and back side panels that shape the leg into a soft rounded volume, and a narrow hem. The shape comes from the cut, not from gathers, so the pants hold their silhouette in a crisp twill or a classic indigo denim.

When to Wear

  • Everyday: with a fitted knit or a cropped top for a modern, relaxed look.
  • Office and smart casual: in a plain twill, with a tucked-in shirt and a structured jacket.
  • Evening: with heels; the pants are floor-length when worn with heels.

Key Design Features

  • Silhouette: fitted at the waist, rounded barrel leg, narrow hem.
  • Front: two pleats on each side of the zip fly, folded toward the side seams, slanted side pockets, curved front side panels with two pleats each, one pleat on the inseam.
  • Back: one waist dart on each side, a single-welt pocket under each dart with the welt ends set into the opening (no flap), curved back side panels.
  • Waistband: straight 5 cm waistband with five belt loops, closed with one button.

Level of Difficulty

Intermediate. You should be comfortable with a zip fly, a single-welt pocket and sewing curved seams.

Fabric Recommendations

Medium-weight woven fabrics with body, so the barrel shape holds:

  • Stretch twill or cotton twill
  • Denim, 300 to 400 g/m2 (9 to 12 oz), rigid or with 1 to 2% elastane, for example classic indigo
  • Light canvas, gabardine

Avoid heavy denim (over 420 g/m2, 13 oz): the waist pleats will not lie flat and the barrel loses its soft volume.

Pocket lining: cotton pocketing, poplin or a firm lining fabric.

Additional Supplies

  • Zipper 23 cm
  • 1 button, 20 mm (≈3/4″): a metal jeans tack button for denim, or a sew-on button for suiting/wool
  • Fusible interfacing (waistband and back welts)
  • Matching thread; for denim also topstitching thread and a jeans needle

Cutter's Must

From Main (self) Fabric:

  • Front - 2 pieces (mirrored)
  • Front Side Panel - 2 pieces (mirrored)
  • Back - 2 pieces (mirrored)
  • Back Side Panel - 2 pieces (mirrored)
  • Waistband - 1 piece
  • Pocket Facing A - 2 pieces (mirrored)
  • Pocket Facing B - 2 pieces (mirrored)
  • Fly - 2 pieces (mirrored)
  • Fly Shield - 1 piece
  • Back Welt - 2 pieces
  • Back Pocket Facing - 2 pieces
  • Belt Loops - 1 strip, cut into 5 loops after sewing

From Lining:

  • Pocket Bag A - 2 pieces (mirrored)
  • Pocket Bag B - 2 pieces (mirrored)
  • Back Pocket Bag - 2 pieces

From Fusible Interfacing:

  • Waistband - 1 piece
  • Back Welt - 2 pieces

Important Information

  • 1.3 cm seam allowance is included on all pieces, hems included (only the lower edge of the Back Pocket Facing has none); the dashed line on the pattern is the seam line.
  • Cut all notches: they mark the pleats, the dart and the seams to match.
  • Pre-wash and press your fabric before cutting; denim and twill can shrink.
  • Check mirrored pieces, notches and grainlines before cutting. For patterned fabrics, align carefully for symmetry.

Assembly Instructions

Preparation

Fuse the interfacing to the wrong side of the Waistband and of both Back Welts.

Transfer the dart and all pleat marks to the wrong side of the fabric. Transfer the welt pocket opening (the two long lines and the two ends) to the right side of each Back with tailor's chalk or thread tracing.

If you do not plan a lined finish, overlock or zigzag the edges of the side seams, inseams and crotch seams now.

Back Darts

Fold each Back right sides together through the middle of the dart, match the dart lines and stitch from the waist to the point. Tie off the threads at the point.

Press the darts toward the side seams.

Back Welt Pockets

The pocket opening is drawn on the Back under the dart: the lower line is the welt line, the upper line is the facing line, and the welt fills the whole opening when finished (2.5 cm high). Its ends are set into the ends of the opening, so no stitching shows on the right side.

Finish the lower edge of each Back Pocket Facing with overlocking or zigzag. Place the facing right side up on the right side of the Back Pocket Bag at the end marked Facing end, matching the raw edges, its lower edge on the facing placement line. Edgestitch the lower edge and baste the sides within the seam allowance.

Fold each Back Welt in half lengthwise, wrong sides together, along the fold line and press. Baste the long raw edges together. Do not stitch the ends: they stay open and are set into the opening later.

Place the welt on the right side of the Back, folded edge down and raw edges toward the upper line, with its stitching line (1.3 cm from the raw edges) on the lower line and its notches at the ends of the opening. Stitch exactly from end to end of the line and backstitch.

Place the facing end of the Back Pocket Bag on the right side of the Back, facing side down, raw edge toward the lower line, with its stitching line on the upper line and its notches at the ends. Stitch exactly from end to end and backstitch. Check on the wrong side that the two lines are parallel and end at exactly the same points.

From the wrong side, cut through the Back only, along the middle between the two lines, stopping 1 cm from each end, then snip diagonally into each of the four corners right up to the last stitch. Leave a small triangle at each end and take care not to cut the welt or the bag.

Push the bag through the opening to the wrong side and press the seam allowances of the upper line away from the opening. Turn the welt seam allowance to the wrong side, so the welt rises and fills the opening; press.

Set in the welt ends: fold the Back back at one end of the opening to uncover the triangle with the welt end under it. Pull the triangle out to square the corner and stitch across its base, through the triangle and the welt end, exactly along the end of the opening. Repeat at the other end. From the right side the welt now sits in the opening with clean, sharp ends.

Fold the bag down along its fold line and bring the welt end of the bag up to the welt seam allowance. Stitch the bag to the seam allowance only, not through the Back, directly over the welt stitching line.

Fold the Back out of the way and stitch the sides of the pocket bag with 1.3 cm seam allowance. Finish the edges together.

Back Side Panels

Pin the curved edge of each Back Side Panel to the curved edge of the Back, right sides together, matching the ends. Stitch, then press the seam allowances open.

Optional, recommended for denim: press both allowances toward the Back and topstitch 6 mm from the seam on the Back side.

Front Pleats

The pleats are simply folded and held in the seam allowance. For each pleat, bring its two notches together, right sides together, and stitch 1.3 cm down from the edge along the fold - the stitching stays within the seam allowance and is hidden in the seam. Below it the pleat stays free.

Waist pleats: two on each Front. Press them so the folds turn toward the side seams, and baste them across the top within the seam allowance.

Inseam pleat: one on each Front, halfway between the crotch and the hem. Press it so that it opens upward, toward the waist.

Front Side Panels

Make the two pleats on each Front Side Panel in the same way. Press them so that they open upward, toward the waist. Check this before you go on: pleats pressed downward are the most common mistake on this pattern.

Pin the pleated edge of each Front Side Panel to the curved edge of the Front, right sides together. Stitch and press the seam allowances open.

Optional, recommended for denim: press both allowances toward the Front and topstitch 6 mm from the seam on the Front side, as on the back.

Slanted Side Pockets

Fold the angled inner edge of each Pocket Facing 1.3 cm to the wrong side and press.

Place Pocket Facing A right side up on Pocket Bag A, and Pocket Facing B on Pocket Bag B, matching the outer edges. Edgestitch along the folded edge and around the facing 3 mm from the edge.

The Front is cut with a slanted pocket edge at the top of the side. Place Pocket Bag A on the Front, right sides together, matching its slanted edge to the slanted edge of the Front. Stitch along the slant, from the waist to the point where it meets the side.

Clip the seam allowance, turn the bag to the inside and press the opening, rolling the seam slightly to the inside. Optional: topstitch the opening 6 mm from the edge.

Place Pocket Bag B under Pocket Bag A, right side of the facing toward the opening, matching the waist and the side. Stitch the two bags together around the curved edge and finish the edges together. Baste the pocket to the Front at the waist and along the side, within the seam allowance.

Side Seams

Place each Front on the matching Back, right sides together, matching the waist, the side panel seams and the hem. Stitch the side seam from the waist to the hem, catching the side edge of the pocket bag.

Press the side seams open.

Zip Fly

Place the two Fly pieces wrong sides together and finish the raw edges together. Fold the Fly Shield in half lengthwise, wrong sides together, and finish the raw edges together.

The fly closes right over left (as worn). Stitch the Fly facing to the right Front (as worn) along the centre front, right sides together. Press the seam open, then fold the facing to the inside.

Place the zipper face down on the Fly facing and stitch the zipper tape close to the curved edge of the facing.

Stitch the other zipper tape to the left Front (as worn), then place the Fly Shield on top and stitch it through all layers, so the zipper is sandwiched between the left Front and the shield.

From the right side, topstitch the fly curve on the right Front through the Front and the facing, keeping the Fly Shield out of the way.

Crotch Seams

Place the pants right sides together. Stitch the front crotch seam from the bottom of the zipper to the crotch point.

Stitch the back crotch seam from the waist down to the crotch point. Press.

Inseams

With the pants inside out, stitch the inseam of each leg from hem to hem in one go, matching the crotch seams. Press.

Belt Loops

Fold the Belt Loop strip in half lengthwise, right sides together, and stitch 6 mm from the edge. Turn right side out with a loop turner, press with the seam at the centre back of the strip, and cut it into 5 equal loops.

Edgestitch both long edges of the strip 2 mm from the edge before cutting it into loops.

Waistband

Fold the Waistband in half lengthwise, right sides together, and stitch both short ends. Clip the corners, turn right side out and press. Fold the raw edges of both long sides 1.3 cm to the inside and press.

Slip the waist of the pants into the waistband, so that both layers of the waistband cover the seam allowance. Pin, matching the centre back and the fly edges: the end with the buttonhole mark goes on the right Front (as worn), flush with the fly edge; the end with the button mark is the underlap and extends on the Fly Shield side, on the left Front (as worn).

Stitch from the right side 3 mm from the lower edge of the waistband, through all layers.

Edgestitch the top edge of the waistband 3 mm from the fold, all around.

Attach the Belt Loops

Place the loops: one at the centre back seam, one on each Front between the two pleats, and one on each side halfway between the front loop and the back loop.

Tuck the ends of each loop under, stitch the lower end just under the waistband, fold the loop up and stitch the upper end to the top of the waistband.

Closure

Work a horizontal buttonhole, 22 mm long, at the buttonhole mark on the overlapping end of the waistband, through all layers. Cut it open.

Close the waistband and mark the button position through the buttonhole onto the underlap (it matches the button mark of the pattern). For denim, hammer on the jeans tack button at the mark; for suiting or wool, sew on the button with a thread shank of about 3 mm, so it sits flat over the thick waistband.

Hem

Finish the lower edge of each leg, turn the 1.3 cm hem allowance to the wrong side and press. Stitch it by machine, or with fusible hem tape for an invisible hem.

For denim: topstitch the hem from the right side, matching the other topstitching.

Final Press

Press the pants on a ham to keep the rounded shape of the legs. Do not press creases into the front: the barrel leg has no crease line.

Check that the waist pleats turn toward the side seams and that the knee and inseam pleats open upward.

Features

Instant download · standard sizes

Ready now, no waiting: PDF A0, A4, US Letter, One Page and Projector files with seam allowances, plus the sewing booklet with fabric requirements — in one ZIP.

Body measurements the sizes are drafted for

SizeHeightWaistHip
XS166 cm65″66 cm26.0″94 cm37.0″
S166 cm65″71 cm28.0″99 cm39.0″
M166 cm65″79 cm31.1″107 cm42″
L166 cm65″86 cm33.9″114 cm45″
XL166 cm65″97 cm38.2″124 cm49″
XXL166 cm65″107 cm42″135 cm53″
See finished garment measurements →

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?