Asymmetric Neck Ruched Front Bodycon Knit Dress

CUTTER'S MUST

• BACK PANEL – 2 QTY
• Right SIDE PANEL of FRONT PANEL – 1 QTY
• Left SIDE PANEL of FRONT PANEL – 1 QTY
• Center part of FRONT PANEL – 1 QTY
• SLEEVE – 2 QTY

Tip: Cut pieces from knit fabrics are sewn with a special elastic or narrow zigzag stitch. When serging, trim SEAM ALLOWANCES to 0.8 cm. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also sew the pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

1. Stitch the center back seam of the BACK PANEL. Press SEAM ALLOWANCES to the left side and serge.
2. Stitch along the right princess seam of the center part of the FRONT PANEL with loosely tensioned stitches and gather. Stitch the right princess seam of the FRONT PANEL, press SEAM ALLOWANCES towards the side seam and serge.
3. Serge the neckline edge of the center part of the FRONT PANEL. Fold the allowance to the wrong side, press and topstitch.
4. Clip the allowance of the left princess seam of the center part of the FRONT PANEL at the NOTCH. Stitch along the left princess seam of the center part of the FRONT PANEL from the NOTCH to the bottom with loosely tensioned stitches and gather. Stitch the left princess seam of the FRONT PANEL, press SEAM ALLOWANCES towards the side seam and serge.
5. Stitch the shoulder seams of the BACK PANEL and FRONT PANEL (on the right side, the shoulder seam allowance of the BACK PANEL is 1.5 cm longer than the shoulder seam of the FRONT PANEL). Press SEAM ALLOWANCES towards the BACK PANEL and serge.
6. Serge the neckline edge of the BACK PANEL and FRONT PANEL. Fold the allowance to the wrong side, press and topstitch.
7. Stitch the side seams of the BACK PANEL and FRONT PANEL. Press SEAM ALLOWANCES towards the BACK PANEL and serge.
8. Stitch the SLEEVE seams. Press SEAM ALLOWANCES and serge.
9. Set the SLEEVES into the armholes, aligning the NOTCHES. Press SEAM ALLOWANCES and serge.
10. Serge the bottom edge of the garment and the bottom edge of the SLEEVE. Fold to the wrong side, press and topstitch.