Dress with Decorative Front Draping

CUTTER'S MUST

• From main fabric:
• 1. BACK PANEL – 2 QTY
• 2. Upper right FRONT PANEL – 1 QTY
• 3. Upper left FRONT PANEL – 1 QTY
• 4. Lower FRONT PANEL – 1 QTY
• 5. SLEEVE – 2 QTY

Tip: Cut pieces from knit fabrics should be stitched with a special elastic or narrow zigzag stitch. When serging, trim SEAM ALLOWANCES to 0.8 cm. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

1. Stitch the center back seam of the BACK PANEL. Press SEAM ALLOWANCES to the left side and serge.
2. Stitch the dart on the upper left FRONT PANEL, press the dart depth upwards.
3. Clip the neckline allowance on the left FRONT PANEL at the corner, serge the SEAM ALLOWANCES, press to the wrong side, and topstitch. Clip the lower edge allowance of the right FRONT PANEL at the mark, serge the allowance from the armhole to the mark, press to the wrong side, and topstitch. Serge the upper edge of the right FRONT PANEL, press to the wrong side, and topstitch.
4. Form and secure the pleats on the right and left upper FRONT PANELS (depths directed towards the armholes). Place the right FRONT PANEL over the left, secure along the shoulder seams, armhole seams, lower edge, side seam, and treat as one piece thereafter. Attach the upper FRONT PANEL to the lower, press SEAM ALLOWANCES upwards and serge.
5. Stitch the shoulder seams of the BACK PANEL and FRONT PANEL (SEAM ALLOWANCES of the BACK PANEL shoulder seams are 1.5 cm longer than the FRONT PANEL shoulder seams). Press SEAM ALLOWANCES towards the BACK PANEL and serge. Stitch the side seams of the BACK PANEL and FRONT PANEL. Press SEAM ALLOWANCES towards the BACK PANEL and serge.
6. Stitch the SLEEVE seams. Press SEAM ALLOWANCES and serge.
7. Set the SLEEVES into the armholes, matching NOTCHES. Press SEAM ALLOWANCES and serge.
8. Serge the lower edge of the garment, the lower edge of the SLEEVE, and the neckline edge of the BACK PANEL. Fold to the wrong side, press, and topstitch.