Embroidered Babydoll

CUTTER'S MUST

• From microfiber:
1. BACK PANEL – 1 QTY
2. FRONT PANEL SIDE PANEL — 2 QTY
3. FRONT PANEL LOWER PART — 1 QTY
• From lace:
1. FRONT PANEL UPPER RIGHT PART - 1 QTY
2. FRONT PANEL UPPER LEFT PART - 1 QTY

Tip: Cut pieces from elastic fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim SEAM ALLOWANCES to 0.6 – 0.8 cm.

Sewing Instructions

1. Stitch the lower part of the FRONT PANEL to the upper right part of the FRONT PANEL, serge the SEAM ALLOWANCES, trimming them to 0.5 cm.
2. Stitch the cup of the upper right part of the FRONT PANEL to the SIDE PANEL, serge the SEAM ALLOWANCES, trimming them to 0.5 cm.
3. Stitch the dart on the cup, simultaneously stitching the relief seam, serge the SEAM ALLOWANCES, simultaneously trimming the dart depth to 0.5 cm.
4. Serge the lower edge of the upper left part of the FRONT PANEL. Place the upper right part of the FRONT PANEL over the upper left part and topstitch along the scallops.
5. Stitch the cup of the upper left part of the FRONT PANEL to the SIDE PANEL, serge the SEAM ALLOWANCES, trimming them to 0.5 cm.
6. Stitch the dart on the cup, simultaneously stitching the relief seam to the mark, serge the SEAM ALLOWANCES, trimming them to 0.5 cm.
7. Serge the edges of the slit with a rolled hem, trimming the allowance.
8. Stitch the side edges, serge the SEAM ALLOWANCES, trimming them to 0.5 cm.
9. Serge the armhole edges and the upper edge of the BACK PANEL with a rolled hem. To prevent stretching, topstitch an elastic TRIM STRIP with a zigzag stitch along this edge on the wrong side, stretching it slightly. The TRIM STRIP should be 10% shorter than the piece.
10. Serge the lower edge of the garment with a thin rolled hem.
11. Sew on the shoulder straps.