Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5774
#5776

Sheer Lace Peignoir with Flounce Cuffs

Pattern #5775

A women's hip-length peignoir in sheer silk with an open front, an under-bust seam and long set-in sleeves ending in flounces. The front is gathered under the bust, all edges are bound with bias tape that extends into neck ties, and a scalloped lace band is stitched across the under-bust seam. Drafted to your own measurements. Recommended fabric: thin, sheer silk fabrics of natural or blended fibres.

Tech. Description

Sheer Lace Peignoir with Flounce Cuffs

A women's hip-length peignoir in sheer silk with an open front, an under-bust seam and long set-in sleeves ending in flounces. The front is gathered under the bust, all edges are bound with bias tape that extends into neck ties, and a scalloped lace band is stitched across the under-bust seam.

When To Wear

  • Over a nightdress or slip at home.
  • As a light cover-up when dressing for a wedding or another special day.

Key Design Features

Silhouette: Close to the body above the under-bust seam, loose and straight below.

Length: Hip length, with rounded front corners.

Neckline: V-neck bound with bias tape; the binding is left free at the front for ties about 40 cm long.

Sleeves: Long set-in sleeves with a flounce attached at the lower edge, finished with a narrow rolled hem.

Front: Open, no fastening apart from the neck ties. The upper front is gathered between notches into the under-bust seam.

Back: Upper and lower back joined by a seam at under-bust level, with waist darts.

Finishing: Front edges and lower edge bound with bias tape folded in half; lace with scallops on both edges, 8–10 cm wide, topstitched over the under-bust seam.

Level Of Difficulty

Intermediate. Gathering, continuous bias binding on curved edges of sheer fabric, attaching flounces with rolled hems and applying lace.

Fabric Recommendations

Thin, sheer silk fabrics of natural or blended fibres.

Additional Supplies

  • Bias tape (approximate length marked on the back pattern piece)
  • Lace band with scallops on both edges, 8–10 cm wide (length marked on the back pattern piece)

Cutter's Must

  • From main fabric:
  • 1. Upper Back – 1 piece
  • 2. Lower Back – 1 piece
  • 3. Upper Front – 2 pieces
  • 4. Lower Front – 2 pieces
  • 5. Sleeve – 2 pieces
  • 6. Flounce – 2 pieces

Sewing Instructions

  1. Stitch the waist darts on the back. Press them towards the center of the piece.
  2. Stitch the lower back to the upper back. Press the seam allowances downwards and overlock them.
  3. Sew a line of long, loose stitches along the lower edge of the upper front between the notches, 0.5 cm from the edge, and gather. Stitch the upper front to the lower front, press the seam allowances downwards and overlock them.
  4. Stitch the shoulder and side seams. Press the seams towards the back and overlock them.
  5. Press the bias tape in half lengthwise and bind the front edges and the lower edge. Bind the back and front neckline, leaving free ends of about 40 cm for the ties.
  6. Stitch and overlock the sleeve seam. Stitch the flounce to the lower edge of the sleeve. Press the seam towards the flounce and overlock it. Finish the lower edge of the flounce with a narrow rolled hem.
  7. Set the sleeves into the armholes, matching the notches. Overlock the seam allowances.
  8. Topstitch the lace onto the peignoir as shown in the drawing.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?