Sheer Lace Peignoir with Flounce Cuffs

CUTTER'S MUST

• From main fabric:
• 1. Upper BACK PANEL – 1 QTY
• 2. Lower BACK PANEL — 1 QTY
• 3. Upper FRONT PANEL - 2 QTY
• 4. Lower FRONT PANEL — 2 QTY
• 5. SLEEVE - 2 QTY
• 6. FLOUNCE – 2 QTY

Sewing Instructions

1. Stitch waist darts on the BACK PANEL. Press towards the center of the piece.
2. Attach the lower BACK PANEL to the upper BACK PANEL. Press SEAM ALLOWANCES downwards and serge.
3. Stitch with loosely tensioned stitches along the lower edge of the upper FRONT PANEL between the NOTCHES at a distance of 0.5 cm from the edge and gather. Attach the upper FRONT PANEL to the lower FRONT PANEL, press SEAM ALLOWANCES downwards and serge.
4. Stitch shoulder and side seams. Press seams towards the BACK PANEL and serge.
5. Press the BIAS BINDING in half lengthwise and bind the front edges of the FRONT PANEL and the lower edges. Bind the neckline of the BACK PANEL and FRONT PANEL, leaving free ends for ties approximately 40 cm long.
6. Stitch and serge the SLEEVE seam. Attach the FLOUNCE to the lower edge of the SLEEVE. Press the attachment seam towards the FLOUNCE and serge. Finish the lower edge of the FLOUNCE with a narrow rolled hem.
7. Set the SLEEVES into the armholes according to the NOTCHES. Serge the SEAM ALLOWANCES.
8. Topstitch lace onto the negligee according to the sketch.