Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5763
#5765

Pleated Scoop Neck Bell Sleeve Blouse

Pattern #5764

A women's hip-length blouse in lace fabric with a scoop neckline, six pleats stitched down from the neckline on the front and released below, and three-quarter sleeves with a flared flounce. Neckline, flounce seams, flounce edges and hem are finished with lace trim in two widths. Drafted to your own measurements. Recommended fabric: lace fabric.

Tech. Description

Pleated Scoop Neck Bell Sleeve Blouse

A women's hip-length blouse in lace fabric with a scoop neckline, six pleats stitched down from the neckline on the front and released below, and three-quarter sleeves with a flared flounce. Neckline, flounce seams, flounce edges and hem are finished with lace trim in two widths.

When To Wear

  • In spring and autumn with jeans, trousers or a straight skirt.
  • For daytime events and evenings out.

Key Design Features

Silhouette: Semi-fitted at the shoulders, widening below the stitched pleats; the back is shaped by two darts.

Length: Hip length, hem overlocked and covered with 4–5 cm lace trim.

Neckline: Wide scoop, edge overlocked and covered with 2 cm lace trim topstitched over it.

Sleeves: Three-quarter set-in sleeves with an eased cap. A flared flounce is joined to the lower edge; the seam is covered with 4–5 cm lace trim and the flounce edge with 2 cm lace trim.

Front: One piece cut on the fold, with three pleats on each side of the centre front, folded with the fold on the right side, stitched from the neckline to a cross mark and pressed towards the centre.

Back: One piece with two darts pressed towards the centre.

Finishing: Shoulder and side seams overlocked and pressed towards the back.

Level Of Difficulty

Intermediate. Accurately stitched release pleats, topstitching lace trims over seams and edges, and handling lace fabric.

Fabric Recommendations

Lace fabric.

Additional Supplies

  • Lace trim 2 cm wide (neckline, flounce edges)
  • Lace trim 4–5 cm wide (flounce seams, hem)

Cutter's Must

  • From main fabric:
  • Back – 1 piece
  • Front – 1 piece (cut on fold)
  • Sleeve – 2 pieces
  • Flounce – 2 pieces

Sewing Instructions

  1. On the front, along the marked lines, fold the first pleat wrong sides together, with the fold on the right side. Stitch the pleat from the right side from the neckline down to the cross mark. Make the remaining pleats in the same way. Press the pleats towards the center of the front, as shown in the illustration.
  2. Stitch the darts on the back. Press the darts towards the center of the back.
  3. Stitch the right shoulder seam. Overlock the seam and press towards the back. Overlock the seam allowance along the neckline edge. Place the 2 cm lace trim over the neckline edge and topstitch. Stitch the left shoulder seam. Overlock the seam and press towards the back. Stitch the side seams. Overlock the seams and press towards the back.
  4. Attach the flounces to the sleeves. Overlock the seam and press upwards. Topstitch the 4-5 cm lace trim over the seam. Topstitch the 2 cm lace trim along the lower edge of the flounces. Stitch the sleeve seams, overlock and press. Set in the sleeves, easing the cap.
  5. Overlock the hem edge of the blouse. Topstitch the 4-5 cm lace trim along the hem.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?