Fitted Draped Dress with Tiered Flounces

Name: Fitted Draped Dress with Tiered Flounces
Brand: Minerva Patterns
SKU: 5587
Price: 5.00 EUR
Availability: InStock

Pattern #5587

This floor-length gown pattern, drafted to your own measurements, features a draped strapless bodice, a decorative necklace creating a halter effect, and a full skirt of five layered flounces. It's an intermediate pattern, designed for formal events, galas, or weddings where making an impression is key. Choose fabrics with good drape for the flowing silhouette.

Tech. Description

Fitted Draped Dress with Tiered Flounces

A stunning women's sewing pattern for a floor-length gown featuring a draped strapless bodice, a decorative necklace that creates a halter effect, and a full skirt composed of five layered flounces.

When To Wear

This exquisite gown is designed for formal and celebratory occasions, making it an ideal choice for:

Formal Events & Galas: Perfect for black-tie affairs, grand celebrations, and upscale evening events where making an impression is key.
Weddings & Receptions: An elegant selection for guests attending formal weddings or as a sophisticated option for bridesmaids.
Red Carpet & Special Occasions: Designed to make a memorable statement at exclusive parties, celebratory gatherings, and high-profile events.

Key Design Features

Silhouette: a fitted, structured bodice transitions into a voluminous, floor-length skirt, creating a romantic tiered silhouette.

Neckline: a strapless bodice paired with a separate decorative necklace, lined and fastened with buttons, that loops around the neck to create an elegant halter effect.

Bodice: The front bodice features pleated draping across the bust; the bodice is shaped with princess seams and a center back seam and is fully lined.

Structure: rigid corset tape is stitched to the princess, center back and right side seam allowances from the upper edge to keep the strapless bodice in place.

Skirt: The full skirt is made of five flounces of graduated length, layered one inside another and all attached at the bodice seam, creating abundant movement and visual interest with each step.

Closure: a discreet invisible zipper in the left side seam for a smooth and flawless finish.

Length: Full-length gown designed to gracefully brush the floor, creating an elegant silhouette.

Level Of Difficulty

Intermediate. Requires careful attention to draping techniques, a lined bodice with corset tape, precise assembly of multiple skirt layers, and accurate invisible zipper insertion.

Fabric Recommendations

Choose lightweight, fluid fabrics with good drape to enhance the cascading flounces and bodice details:

Lightweight natural or blended fabrics

Additional Supplies

Invisible zipper
Decorative material for the necklace
Buttons for the necklace
Rigid corset tape, 0.75 cm wide
Lining fabric

Cutter's Must

From main fabric:

Center Back – 2 pieces
Side Back – 2 pieces
Center Front – 1 piece
Side Front – 2 pieces
Draping – 1 piece
Decorative Necklace – 1 piece
First Skirt Flounce – 1 piece
Second Skirt Flounce – 1 piece
Third Skirt Flounce – 1 piece
Fourth Skirt Flounce – 1 piece on fold
Fifth Skirt Flounce – 1 piece on fold

From lining fabric:

Center Back – 2 pieces
Side Back – 2 pieces
Center Front – 1 piece
Side Front – 2 pieces
Decorative Necklace – 1 piece

Tip: Main fabric can be used as lining.

Sewing Instructions

On the main fabric pieces, stitch the center back seam and the princess seams on the back and front. Serge and press towards the center.
Cut the corset tape into 6 equal lengths. Stitch the tape lengths to the seam allowances of the princess seams and the center back seam, starting from the upper edge of the dress.
On the lining pieces, stitch the center back seam, the princess seams on the back and front, and the right side seam. Serge and press the seams.
Form the pleats on the draping piece. Machine-baste with a long stitch along the center front line and along the side edges. Baste the draping piece to the upper edge of the front and to the side edges.
Stitch the right side seam, serge and press towards the back. Stitch corset tape to the right side seam allowance.
Stitch the side seam on each skirt flounce from the zipper notch downwards. Place the skirt flounces one inside another. Baste them together along the upper edge, matching the seams.
Place the bodice and the skirt flounces right sides together and stitch. Serge the seam and press it upwards.
Press the zipper seam allowances on the left side to the wrong side. Insert the invisible zipper. Press the seam.
Place the dress and the lining right sides together. Stopping 5 mm short of the zipper edges, fold back the lining and pin it to the upper edge of the dress. Fold the seam allowances along the zipper to the right side of the dress and pin them to the upper edge over the lining. Stitch along the upper edge. Turn the allowances along the zipper to the wrong side. Fold the lining up and understitch it to the seam allowance 1-2 mm from the seam. Turn the lining to the wrong side and attach it to the zipper tape. Stitch the lower edge of the lining into the seam joining the bodice and skirt.
Serge the lower edges of the skirt flounces, turn 0.5 cm to the wrong side and topstitch.
Stitch the decorative necklace and its lining together and turn right side out; make buttonholes and sew on the buttons.