Ruffled Asymmetrical Flounce Midi Dress
Introducing a charming women's midi dress sewing pattern featuring a distinctive ruffled one-shoulder bodice and a gracefully asymmetrical flounced hemline.
When To Wear
This elegant and airy dress is perfect for warm-weather occasions where style meets comfort, ideal for:
- Resort & Vacation Wear: A perfect choice for coastal getaways and relaxed holiday settings.
- Summer Parties & Gatherings: Suitable for garden parties, brunches, or evening social events.
- Stylish Daytime Chic: Elevate your everyday look with its unique silhouette and feminine details.
Key Design Features
Silhouette: A flattering fit-and-flare silhouette with a defined waist leading to a flowy, asymmetrical midi-length skirt.
Neckline: A gentle V-neckline at the front, complemented by a straight-across back neckline.
Shoulder Straps: An elegant design featuring a wide, ruffled strap on one shoulder and a delicate spaghetti strap on the other.
Bodice: A fitted bodice shaped with bust and waist darts, enhanced by asymmetrical ruffles cascading across the front.
Back: A clean, fitted back bodice with a discreet center seam.
Hem: An eye-catching asymmetrical high-low hemline, finished with a full, gathered flounce for graceful movement.
Closure: A practical and invisible zipper closure positioned along the center back seam.
Level Of Difficulty
Intermediate. This pattern requires accurate dart construction, precise ruffle application, invisible zipper insertion, and neat bias tape finishing.
Fabric Recommendations
Choose lightweight, fluid fabrics with good drape to best showcase the ruffles and flounce, such as:
- Lightweight cottons (e.g., cotton lawn, voile)
- Rayon challis or viscose blends
- Linen blends
- Soft silks or silk blends
Additional Supplies
- Invisible zipper, 25 cm (10 inches)
- Bias tape
CUTTER'S MUST
- From main fabric:
- 1. Right BACK PANEL – QTY 1
- 2. Left BACK PANEL – QTY 1
- 3. FRONT PANEL – QTY 1
- 4. Back FLOUNCE – QTY 1
- 5. Right front FLOUNCE – QTY 1
- 6. Left front FLOUNCE – QTY 1
- 7. FLOUNCE – QTY 4
Sewing Instructions
- Mark and stitch bust darts. Press bust darts downwards.
- Mark and stitch waist darts on the FRONT PANEL and BACK PANEL. Press darts on the FRONT PANEL towards the center front, and on the BACK PANEL towards the center back.
- Overlock the center edge of the right and left front FLOUNCE. Press the overlocked edge to the wrong side and topstitch 0.5 cm from the edge. Overlap the FLOUNCES according to the NOTCHES and secure the upper edge of the FLOUNCES between the NOTCHES.
- Attach the front FLOUNCES to the FRONT PANEL, overlock the attachment seam and press towards the FRONT PANEL.
- Overlock the center back edge. Stitch the center back seam up to the NOTCH for the ZIPPER. Press open the center back seam, pressing the allowances for the ZIPPER.
- Attach the FLOUNCE to the BACK PANEL, overlock the attachment seam and press towards the BACK PANEL.
- Stitch the side edges of the FRONT PANEL and BACK PANEL. Overlock the side seams and press towards the BACK PANEL.
- Stitch the side edges of the FLOUNCES, overlock the seam and press. Overlock the outer and side edges of the FLOUNCE with a rolled hem.
- Put on the dress, adjust the length of the FLOUNCE and measure the strap length. Baste the FLOUNCE to the neckline edge of the FRONT PANEL and BACK PANEL according to the technical drawing.
- Fold the BIAS BINDING in half and press. Bind the armhole edge of the FRONT PANEL and BACK PANEL with BIAS BINDING. Bind with BIAS BINDING: the neckline edge of the BACK PANEL, the inner edge of the FLOUNCE, and the neckline edge of the FRONT PANEL. From the extension of the BIAS BINDING, stitch the strap and attach it to the BACK PANEL.
- Insert the ZIPPER.
- Overlock the lower edge of the FLOUNCES, press and topstitch 0.5 cm from the edge.
