Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5495
#5497

Gathered Tie Neck Bell Sleeve Asymmetrical Tunic

Pattern #5496

A loose women's tunic with a gathered neckline bound in bias tape that extends into ties, a keyhole slit at the centre front, long wide flared sleeves and a hem cut to a point at the front and back, with side slits. Drafted to your own measurements. Recommended fabric: light, soft woven fabrics that gather well: viscose, crepe de Chine, georgette, cotton voile or batiste.

Tech. Description

Gathered Tie Neck Bell Sleeve Asymmetrical Tunic

A loose women's tunic with a gathered neckline bound in bias tape that extends into ties, a keyhole slit at the centre front, long wide flared sleeves and a hem cut to a point at the front and back, with side slits.

When To Wear

  • In warm weather, worn loose over trousers, leggings or jeans.
  • For everyday and holiday wear in light, soft fabrics.

Key Design Features

Silhouette: Loose and straight, cut from three pieces: one front, one back and two sleeves; bust darts on the front.

Length: Tunic length, longest at the centre front and centre back points.

Neckline: Front and back neckline gathered on a loose stitch line to the amount wanted at fitting; a keyhole slit at the centre front; the neckline and slit are bound with folded bias tape, left long at the front to tie.

Sleeves: Long sleeves that widen towards the hem, with the seam lines running from the neckline to the underarm as shown in the drawing.

Finishing: Side seams open into slits above the hem, topstitched 0.5 cm from the edge; hem and sleeve hems finished with a rolled overlock edge.

Level Of Difficulty

Beginner. Few pieces, bust darts, gathering and bias binding of the neckline, and a rolled overlock hem.

Fabric Recommendations

Light, soft woven fabrics that gather well: viscose, crepe de Chine, georgette, cotton voile or batiste.

Additional Supplies

  • Bias tape for the neckline binding and ties

Cutter's Must

  • From main fabric:
  • Sleeve – 2 details
  • Front – 1 detail
  • Back – 1 detail

Sewing Instructions

  1. Mark and stitch the bust darts on the front. Press the bust darts downwards.
  2. Overlock the side edges of the tunic. Stitch the side seams of the tunic up to the notch for the slit. Press open the side seams of the tunic, press the slits. Topstitch along the slits at a distance of 0.5 cm from the edge.
  3. Stitch and overlock the sleeve seam. Press the sleeve seam towards the back.
  4. Set in the sleeves.
  5. Along the neckline edge of the front and back, at a distance of 0.5 cm from the edge, stitch with loosely tensioned stitches. Try on the garment and gather the upper edge of the detail to the desired amount, distributing the created gathers evenly along the entire length.
  6. Fold the bias tape in half lengthwise and press. Bind the shaped neckline of the front and the neckline of the front and back with bias tape, leaving the bias tape for ties.
  7. Overlock the bottom of the garment and sleeves with a rolled hem.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?