V-Neck Dolman Tunic Tie Hem

CUTTER'S MUST

• From main fabric:
• BACK PANEL – 1 QTY
• FRONT PANEL – 1 QTY
• TRIM STRIP – 2 QTY

Sewing Instructions

1. Stitch the right shoulder seam. Press the seam towards the BACK PANEL and overlock.
2. Cut a BIAS BINDING 4 cm wide and of a length equal to the neckline length of the BACK PANEL and FRONT PANEL. Press the BIAS BINDING in half lengthwise, right side out. Then unfold and press the raw edges towards the marked center line. Finish the tunic neckline with the BIAS BINDING.
3. Stitch the left shoulder seam. Press the seam towards the BACK PANEL and overlock.
4. Overlock the bottom edges, press to the wrong side and topstitch.
5. Press the short edges of the TRIM STRIP to the wrong side and topstitch. Press the long edges of the TRIM STRIP to the wrong side. Place the TRIM STRIP on the FRONT PANEL according to the markings and topstitch 0.1 cm from the fold.
6. Cut 2 ties of the desired length and 10 cm width. Fold the ties in half lengthwise, right sides together, and stitch along the long and short sides. Turn the ties right side out, baste, and press. Fold the raw SEAM ALLOWANCES inwards and topstitch 0.1 cm from the edge. Insert the ties into the TRIM STRIPS.