Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5299
#5301

Drawstring Neck Raglan Blouse with Flounce Sleeves

Pattern #5300

A women's pull-on blouse to the hip with raglan sleeves finished by two tiers of flounces, a round neckline with a drawstring casing and a bias-bound slit at the centre front. Shaped by vertical darts on the front and back. Drafted to your own measurements. Recommended fabric: chiffon in natural silk or polyester.

Tech. Description

Drawstring Neck Raglan Blouse with Flounce Sleeves

A women's pull-on blouse to the hip with raglan sleeves finished by two tiers of flounces, a round neckline with a drawstring casing and a bias-bound slit at the centre front. Shaped by vertical darts on the front and back.

When To Wear

  • In spring and summer with trousers, jeans or a pencil skirt.
  • For evening dinners and parties when cut in silk chiffon.

Key Design Features

Silhouette: Semi-fitted, shaped by two vertical darts on the front and two on the back.

Length: To the hip, with a straight, turned-up and topstitched hem.

Neckline: Round neckline turned under and topstitched to form a casing, with a cord threaded through and tied at the centre front. A slit below the neckline at the centre front is finished with a 5 cm bias binding folded in half and topstitched.

Sleeves: Raglan sleeves; a smaller and a bigger flounce are attached to the lower edge of each sleeve, giving a two-tier flared finish. Flounce edges turned up and topstitched.

Front: One piece, no closure: the blouse slips over the head.

Back: One piece with two vertical darts.

Level Of Difficulty

Intermediate. Sheer fabric, a bias-bound slit, a drawstring casing and narrow hems on four flounces.

Fabric Recommendations

Chiffon in natural silk or polyester.

Additional Supplies

  • Cord for the neckline drawstring

Cutter's Must

  • Front - 1 piece
  • Back - 1 piece
  • Sleeve - 2 pieces
  • Bigger Flounce - 2 pieces
  • Smaller Flounce - 2 pieces

Cut bias binding 5.0 cm wide.

Sewing Instructions

  1. Stitch vertical darts on the front and back.
  2. Attach the Smaller Flounce and Bigger Flounce to the lower edge of each sleeve.
  3. Stitch the sleeve seams.
  4. Stitch the side seams.
  5. Set the sleeves into the armholes.
  6. Fold the bias binding for the keyhole slit in half lengthwise and press. Stitch the folded binding to the edge of the slit so that the fold lies 0.75 cm onto the garment. Trim the seam allowances to 0.5 cm. Turn the binding to the wrong side and topstitch the blouse along the slit.
  7. Fold under and topstitch the neckline edge of the front and back to form a casing, leaving an opening for the cord.
  8. Prepare the cord and thread it through the neckline casing.
  9. Fold under and topstitch the lower edges of the sleeves and the blouse.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?