Button-Down Collared Cuffed Short Sleeve Blouse

CUTTER'S MUST

• From main fabric:
1. FRONT PANEL - 2 QTY
2. BACK PANEL – 1 QTY
3. SLEEVE - 2 QTY
4. COLLAR – 2 QTY
5. COLLAR STAND – 2 QTY
• FROM FUSIBLE INTERFACING: placket, upper COLLAR, COLLAR STAND.

Sewing Instructions

1. Press each seam after stitching, serge, and press again.
2. Reinforce the placket, upper COLLAR, and COLLAR STAND with FUSIBLE INTERFACING.
3. Stitch the bust darts on the FRONT PANEL and topstitch them.
4. Stitch the shoulder seams of the blouse, topstitch.
5. Set in the SLEEVES, topstitch the seams.
6. Serge the side edges of the blouse separately for a length of 15 cm from the bottom, then stitch the seams up to the slit markings.
7. Press the SLEEVE hem allowance twice to the wrong side by 3 cm, topstitch the fold at foot width, then press the hem allowance down again. Topstitch the lower edge of the fold also at foot width.
8. Process the placket.
9. FACE the lower COLLAR with the upper COLLAR, turn the COLLAR out and topstitch.
10. Stitch the COLLAR STANDS, inserting the COLLAR between them.
11. Set in the lower COLLAR STAND with the COLLAR into the neckline, turn under the open edge of the upper COLLAR STAND and topstitch into the seam of the lower COLLAR STAND.
12. Hem and topstitch the bottom of the garment. Hem and topstitch the slit allowances.
13. On the right FRONT PANEL, make buttonholes, and on the left FRONT PANEL, sew on buttons.