Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5270
#5272

Asymmetric Buckle Faux Wrap Skirt

Pattern #5271

A women's knee-length skirt, slightly flared, with an asymmetric front: a curved edge runs from the side waist down beside the centre front seam, and a shaped tab with eyelets fastens through a buckle at the side. A zipper in the upper centre front seam, single-welt pockets on the back and a back slit. Drafted to your own measurements. Recommended fabric: light natural fabrics and blended-fibre fabrics, for example crepe.

Tech. Description

Asymmetric Buckle Faux Wrap Skirt

A women's knee-length skirt, slightly flared, with an asymmetric front: a curved edge runs from the side waist down beside the centre front seam, and a shaped tab with eyelets fastens through a buckle at the side. A zipper in the upper centre front seam, single-welt pockets on the back and a back slit.

When To Wear

  • For office and daytime wear with a blouse or a fitted knit tucked in.
  • In spring and summer in lighter fabrics, with tights and a jacket in autumn.

Key Design Features

Silhouette: Slightly A-line, shaped with darts on the front and back panels.

Length: To the knee.

Waist: No waistband; the top edge is finished with interfaced front and back facings. The shaped tab is faced together with the waist edge.

Front: Right and left front panels of different shape joined by a centre front seam. A curved edge rises from the centre front to the side waist and ends in the tab, which passes through a buckle on a small side strap; a belt loop holds the tab end.

Closure: Zipper in the upper part of the centre front seam.

Pockets: Two single-welt pockets on the back, below the darts.

Back: Centre back seam with a slit at the hem, edges of the slit topstitched.

Finishing: Hem turned up and topstitched.

Level Of Difficulty

Intermediate. Welt pockets, a zipper in a front seam, a faced waist with a shaped tab, eyelets and a buckle strap.

Fabric Recommendations

Light natural fabrics and blended-fibre fabrics, for example crepe.

Additional Supplies

  • Fusible interfacing (waist facings, pocket welts, a 4 cm strip behind each pocket)
  • Zipper
  • Shaped buckle
  • Eyelets

Cutter's Must

From main fabric:

  • Pocket Bag – 2 pieces on fold
  • Pocket Facing – 2 pieces
  • Side Tab – 1 piece
  • Belt-Loop – 1 piece
  • Back Skirt – 2 pieces
  • Front Right Skirt – 1 piece
  • Front Left Skirt – 1 piece
  • Back Facing – 1 piece on fold
  • Right Front Facing – 1 piece
  • Left Front Facing – 1 piece
  • From fusible interfacing: reinforce the back facing, right and left front facings and pocket facings.

Sewing Instructions

  1. Fuse interfacing to the back facing, the right and left front facings and the pocket facings. (Fusible interfacing is pressed onto the wrong side of the piece with a hot iron.)
  2. Stitch the darts on the front and back skirt pieces and press them towards the centre.
  3. Make the welt pockets on the back skirt pieces: on the wrong side of each back skirt, fuse a 4 cm wide strip of interfacing over the pocket marking. Press the pocket facings in half lengthwise, right side out. Pin a pocket facing below the marked pocket opening line, raw edge towards the line, and a pocket bag above it, raw edge towards the marking. Stitch 1 cm from the line. Cut the skirt between the stitching lines, cutting diagonally into the ends of the stitching; take care not to cut the pocket facings and pocket bags. Press the seam allowances onto the skirt. Turn the pocket facings to the wrong side so that they form a neat welt, and baste. From the right side of the skirt, stitch exactly in the ditch of the pocket facing seam. Turn the small triangles at the ends of the cut to the wrong side and stitch them onto the pocket facing exactly from the end of one stitching line to the end of the other. On the wrong side, stitch the free end of the pocket bag to the seam allowances of the pocket facing, press the pocket bag down, align the edges and stitch.
  4. Stitch the centre back seam down to the slit notch. Press the seam allowances open. Topstitch the edges of the slit. Stitch the side seams. Press the seam allowances open.
  5. Stitch the back facing, right front facing and left front facing together. Stitch the facings to the upper edge of the skirt and around the shaped tab, right sides together. Turn the facings to the wrong side, baste and press.
  6. Stitch the centre front seam from the zip notch down to the hem. Clip the seam allowances at the notch: press the lower parts onto the front right skirt and the upper part onto the front left skirt.
  7. Stitch the left zip tape under the left zip allowance. Match the centre lines of the front panels and stitch the right zip tape and the front seam allowances in one line of stitching.
  8. Press the hem allowance to the wrong side, turn under and topstitch.
  9. Stitch around the side tab and the belt-loop, turn them right side out, baste and press. Thread the buckle onto the side tab and stitch the side tab to the skirt. Set the eyelets in the shaped tab. Sew on the belt-loop.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?