Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5269
#5271

Denim Skirt with Detachable Utility Belt-Pouch

Pattern #5270

A women's straight midi skirt with a fly-front zipper that opens into a centre front slit, two patch pockets on the back and a wide faced waist band. It comes with a separate belt carrying a zipped pouch, attached with hook-and-loop tape. Drafted to your own measurements. Recommended fabric: medium-weight denim or other firm cotton twill that holds the straight shape of the skirt and the pouch.

Tech. Description

Denim Skirt with Detachable Utility Belt-Pouch

A women's straight midi skirt with a fly-front zipper that opens into a centre front slit, two patch pockets on the back and a wide faced waist band. It comes with a separate belt carrying a zipped pouch, attached with hook-and-loop tape.

When To Wear

  • Everyday wear in spring and autumn with a tucked-in shirt, T-shirt or fitted knit.
  • With the belt-pouch on days out when you want to carry a phone and keys without a bag; without it for the office.

Key Design Features

Silhouette: Straight and close-fitting, shaped with darts on the front and back panels.

Length: Midi, below the knee.

Waist: A wide band at the top of the skirt, built from shaped front and back facings: the upper facings are sewn to the skirt edge and finished inside with a second set of facings. Hook-and-loop tape is stitched to the band to hold the belt.

Front: Centre front seam with a topstitched fly zipper (fly shield and fly facing); below the zipper the seam opens into a long slit with topstitched edges.

Pockets: Two patch pockets on the back, edges topstitched 1 mm from the fold.

Back: Centre back seam and two darts.

Finishing: Belt made of two layers, one of them interfaced, with the pouch sewn in, a zipper set between belt and pouch, edge-stitched all round, hook-and-loop tape at both ends.

Level Of Difficulty

Intermediate. A fly-front zipper, a front slit, a faced waist band in two layers and a belt with a zipped pouch.

Fabric Recommendations

Medium-weight denim or other firm cotton twill that holds the straight shape of the skirt and the pouch.

Additional Supplies

  • Fusible interfacing (waist facings, fly facing, fly shield, one belt piece)
  • Zipper for the fly front
  • Zipper for the belt pouch
  • Hook-and-loop tape (Velcro)

Cutter's Must

From main fabric:

  • Fly Piece – 1 piece
  • Button Catch (fly shield) – 1 piece on fold
  • Back Skirt – 2 pieces
  • Pocket – 2 pieces
  • Front Skirt – 2 pieces
  • Back Facing – 2 pieces on fold
  • Front Right Facing – 2 pieces
  • Front Left Facing – 2 pieces
  • Waistband (belt) – 2 pieces
  • Bag Pocket – 2 pieces
  • From fusible interfacing: Back Facing, Front Right Facing and Front Left Facing pieces, Button Catch, Fly Piece, one Waistband piece.

Sewing Instructions

  1. Fuse interfacing to the facing pieces, the button catch, the fly piece and one waistband piece. (Fusible interfacing is pressed onto the wrong side of the piece with a hot iron.)
  2. Stitch the darts on the front skirt and back skirt pieces and press them towards the centre. Place the fly piece on the right front skirt right sides together and stitch. Fold the fly piece to the wrong side, baste along the seam and press.
  3. Stitch the centre back seam, and the centre front seam from the fly piece down to the slit notch. Press the seams open, overlock and topstitch around the slit.
  4. Press the upper edge of each pocket to the wrong side, turn the raw edge in by 0.5 cm and topstitch 1 mm from the edge. Press the remaining pocket allowances to the inside, place the pocket on the back skirt along the placement line and topstitch 1 mm from the edge.
  5. Zip closure. Press the centre seam allowance of the left front skirt to the wrong side. Fold the button catch in half lengthwise, right side out, press and overlock the open edges. Stitch the zip under the pressed edge of the left front skirt, edge to edge, with the teeth right next to the fold, placing the button catch underneath with its fold towards the centre so that its overlocked edge covers the zip tape. Pin the opening closed, matching the centre front lines. Stitch the free zip tape to the fly piece on the right side of the opening without catching the front skirt. Topstitch the right front skirt along the opening following the marking, catching the fly piece and folding the button catch out of the way. Stop the stitching 1.5–2 cm short of the centre seam, return the button catch to its place and continue stitching to the seam.
  6. Stitch the front right facing and front left facing to the back facing at the side edges. Press the seam allowances open. Place the upper set of facings on the top edge of the skirt right sides together and stitch. Press the seam allowance towards the facing. Face the top edge with the lower set of facings, turn them to the wrong side, baste and press. Stitch the open edges of the lower facings in the ditch of the upper facings' attachment seam.
  7. Press the hem allowance of the skirt to the wrong side, turn under and topstitch. Stitch the hook-and-loop tape to the facings.
  8. Stitch the darts on the bag pocket pieces. Stitch a bag pocket to each waistband piece, right sides together, leaving an opening in the seam of the upper bag pocket for the zip. Press the seams open. Insert the zip between the waistband and the bag pocket. Place the two waistband pieces right sides together and stitch around the outline, catching the bag pockets. Turn the waistband right side out, baste, press and edgestitch, joining the bag pockets together. Stitch the hook-and-loop tape to the ends of the waistband.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?