Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5271
#5273

Straight Skirt with High Waist

Pattern #5272

A women's knee-length straight skirt with a raised waist finished by a facing instead of a waistband. Two darts on the front and two on the back, a zipper in the centre back seam and a lapped back vent. Drafted to your own measurements. Recommended fabric: fine wool fabrics: fine broadcloth, wool crepe, gabardine.

Tech. Description

Straight Skirt with High Waist

A women's knee-length straight skirt with a raised waist finished by a facing instead of a waistband. Two darts on the front and two on the back, a zipper in the centre back seam and a lapped back vent.

When To Wear

  • For the office with a blouse or fine knit tucked in, or with a matching jacket as a suit.
  • In autumn, winter and spring in wool, with tights.

Key Design Features

Silhouette: Straight, fitted at the waist and hips, slightly narrowing to the hem.

Length: To the knee.

Waist: Raised above the natural waist, no waistband. The top edge is finished with an interfaced facing, understitched and hand-sewn to the darts and seam allowances inside.

Front: One piece cut on the fold, with two darts.

Closure: Zipper in the centre back seam; the facing ends are turned in and sewn to the zipper tapes.

Back: Two panels with a centre back seam and two darts. A lapped vent at the hem: the left back has a cut-on vent facing, the right back an underlay, held by a diagonal line of topstitching at the top of the vent.

Finishing: Hem pressed up and hand-sewn.

Level Of Difficulty

Beginner. Darts, a zipper in a straight seam, a waist facing and a simple vent with a cut-on facing.

Fabric Recommendations

Fine wool fabrics: fine broadcloth, wool crepe, gabardine.

Additional Supplies

  • Fusible interfacing (waist facings)
  • Zipper

Cutter's Must

From main fabric:

  • 1. Front Skirt Facing – 1 piece on fold
  • 2. Back Skirt Facing – 2 pieces
  • 3. Back Skirt – 2 pieces
  • 4. Front Skirt – 1 piece on fold
  • From fusible interfacing: fuse the front skirt facing and back skirt facings.

Sewing Instructions

  1. Stitch the darts on the front skirt and back skirt pieces and press them towards the centre.
  2. Stitch the centre back seam between the zip notch and the vent notch, then stitch the side seams. Insert the zip.
  3. Stitch the side seams of the front skirt facing and back skirt facings. Place the facing on the skirt right sides together and stitch it to the upper edge. Trim the seam allowances close to the stitching, press them towards the facing and understitch close to the seam. Turn the facing to the wrong side and hand-sew it to the dart allowances and seam allowances. Turn under the ends of the facing and sew them to the zip tapes.
  4. Press the hem allowance to the wrong side and hem by hand. Press the cut-on vent facing of the left back skirt to the wrong side along the fold line and sew it to the hem. Hem the long edge of the vent underlay on the right back skirt as narrowly as possible. Topstitch the left back skirt diagonally at the top of the vent, catching the vent underlay.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?