Elastic Waist Pajama Pants

Name: Elastic Waist Pajama Pants
Brand: Minerva Patterns
SKU: 5263
Price: 5.00 EUR
Availability: InStock

Pattern #5263

Women's full-length pull-on pajama trousers with straight wide legs and a cut-on waist facing stitched into three elastic casings. Four pattern pieces: two fronts and two backs. Drafted to your own measurements. Recommended fabric: light silk or synthetic fabrics, such as satin.

Tech. Description

Elastic Waist Pajama Pants

Women's full-length pull-on pajama trousers with straight wide legs and a cut-on waist facing stitched into three elastic casings. Four pattern pieces: two fronts and two backs.

When To Wear

As sleepwear with a matching top or nightshirt.
For lounging at home.

Key Design Features

Silhouette: Loose, wide straight legs from hip to hem.

Length: Full length.

Waist: Cut-on facing turned to the inside and topstitched 0.1 cm from the fold, then stitched along the marked lines into three casings; three lengths of elastic, each equal to the waist measurement, are threaded through an opening left in the centre back seam.

Closure: None; pulls on over the hips.

Legs: Inseams and side seams pressed open; deep turned-up hems, topstitched.

Level Of Difficulty

Beginner. Straight seams, a crotch seam and an elastic casing; no closures.

Fabric Recommendations

Light silk or synthetic fabrics, such as satin.

Additional Supplies

Elastic for the waist: three lengths, each equal to the waist measurement

Cutter's Must

Front - 2 pieces
Back - 2 pieces

Sewing Instructions

Stitch the inseam and side seams, placing the front and back pieces right sides together. Press seam allowances open.
Place the trouser halves right sides together. Stitch the center seam, leaving an unstitched section at the back above the fold line of the integrated facing for threading elastic trim strip.
Press the integrated facing to the wrong side, fold under the seam allowance, and topstitch 0.1 cm from the fold. Stitch along the marked lines and thread three pieces of trim strip, equal to the waist circumference, through the created casings.
Press the seam allowances for the trouser hem to the wrong side, fold under, and topstitch.