Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5239
#5241

Sleeveless Wide Leg Jumpsuit with Waist Insert

Pattern #5240

A full-length sleeveless jumpsuit for knit fabric, with a stretch lace insert at the waist that dips to a point at the centre front and centre back, wide gathered trousers and snap closures on the shoulders. The neckline and armholes are bound. Drafted to your own measurements. Recommended fabric: cotton knit fabrics such as cotton jersey, with stretch lace for the waist insert.

Tech. Description

Sleeveless Wide Leg Jumpsuit with Waist Insert

A full-length sleeveless jumpsuit for knit fabric, with a stretch lace insert at the waist that dips to a point at the centre front and centre back, wide gathered trousers and snap closures on the shoulders. The neckline and armholes are bound.

When To Wear

  • In summer, for days off and holidays.
  • With sandals or flat shoes, on its own or under a cardigan.

Key Design Features

Silhouette: Bodice and trousers joined by a waist insert; wide legs.

Length: Full length.

Neckline: Scoop neckline, lower at the front, finished with binding strips stitched on at 0.7 cm, folded to the wrong side and topstitched into the seam.

Sleeves: Sleeveless; armholes bound the same way as the neckline.

Closure: Shoulder closures with cut-on facings, fastened with snaps: two per shoulder, upper parts on the front edges, lower parts on the back edges.

Back: Bodice cut on the fold, with the same lace insert as the front.

Waist: A stretch lace insert, joined at the side seams and stretched as it is stitched to the lower edge of the bodice and the gathered top of the trousers.

Legs: Wide legs cut in front and back halves, with side seams, inseams and a centre seam; turned and topstitched hems.

Level Of Difficulty

Intermediate. Binding knit edges, gathering, attaching a stretch lace insert under tension and setting snaps.

Fabric Recommendations

Cotton knit fabrics such as cotton jersey, with stretch lace for the waist insert.

Additional Supplies

  • Stretch lace
  • Woven fusible interfacing
  • 4 snaps

Cutter's Must

  • Front Half – 2 pieces
  • Back Half – 2 pieces
  • Back – 1 piece on fold
  • Front – 1 piece on fold
  • Back Inset – 1 piece on fold
  • Front Inset – 1 piece on fold
  • Back Neckline Piping – 1 piece
  • Front Neckline Piping – 1 piece
  • Armhole Piping – 2 pieces

Sewing Instructions

  1. Stitch the side seams of the Front and Back. Turn the cut-on facings of the front and back shoulder closures to the wrong side along the fold line and baste.
  2. Stitch each Armhole Piping strip into a ring. Place the Armhole Piping, Back Neckline Piping and Front Neckline Piping strips on the armhole, back neckline and front neckline edges and stitch 0.7 cm from the edge. Fold the strips over to the wrong side, turn under the raw edge and stitch in the ditch of the seam.
  3. Stitch the side seams, inseams and crotch seam of the trousers (Front Half and Back Half pieces). Gather the upper edges of the trousers.
  4. Stitch the side seams joining the Front Inset and Back Inset, then stitch the insert, stretching it, to the lower edges of the Front and Back and to the upper edges of the trousers.
  5. Fold the hem allowance to the wrong side, turn the raw edge under and topstitch.
  6. Set the upper parts of the snaps on the front edges of the shoulder closures and the lower parts on the back edges.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?