Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5233
#5235

Lace Trim Spaghetti Strap Slip Dress

Pattern #5234

A women's above-the-knee slip dress on narrow straps, with separate darted cups edged in scalloped lace and a matching lace band at the hem. Front and back are shaped with vertical darts. Drafted to your own measurements. Recommended fabric: silk fabrics from natural or blended fibres; satin.

Tech. Description

Lace Trim Spaghetti Strap Slip Dress

A women's above-the-knee slip dress on narrow straps, with separate darted cups edged in scalloped lace and a matching lace band at the hem. Front and back are shaped with vertical darts.

When To Wear

  • As a slip under sheer dresses and skirts.
  • As a nightdress or at home in warm weather.
  • On summer evenings, with a jacket or cardigan over it.

Key Design Features

Silhouette: Fitted at the bust, slightly widening towards the hem.

Length: Above the knee.

Neckline: V at the centre front where the two cups meet; the upper edge of each cup is covered with scalloped lace, shaped with the iron and pleated at the corners.

Front: Front cut on the fold with two vertical darts; the cups, each with a dart, are sewn to the front along a curved seam under the bust.

Back: Cut on the fold with darts; the straight upper edge is finished with a facing cut on the fold.

Finishing: Self-fabric spaghetti straps sewn under the cup points at the front and under the back facing; their length is adjusted at a fitting. The lace on the cups is attached with a dense narrow zigzag. The hem lace is joined into a ring and sewn to the lower edge with the scallops hanging down.

Level Of Difficulty

Intermediate. Shaping and appliquéing lace onto the cups, darts, a faced back edge and narrow turned straps.

Fabric Recommendations

Silk fabrics from natural or blended fibres; satin.

Additional Supplies

  • Lace trim with a scalloped edge on one side (for the cups and the hem)

Cutter's Must

From main fabric:

  • 1. Back – 1 piece on fold
  • 2. Cup – 2 pieces
  • 3. Front – 1 piece on fold
  • 4. Strap – 2 pieces
  • 5. Back Facing – 1 piece on fold

From lace:

  • 6. Lace Trimming – 1 piece
  • Lace strip for the hem – cut to the length of the lower edge

Sewing Instructions

  1. Stitch the darts on the Back and Front.
  2. Pin the Lace Trimming to the right side of the Cups, aligning the scalloped edge with the upper edge of the Cups. Shape the lace to the Cups with the iron. At the corners, fold small pleats in the lace on the wrong side and stitch them like seams. Trim and overlock the seam allowances. Edge-stitch the lower edge of the lace to the Cups. Cut away the Cup fabric under the lace, leaving a 1 cm allowance, and press these allowances onto the Cups. Sew a dense, narrow zigzag stitch along the lower edge of the lace and trim the excess fabric close to the stitching.
  3. Stitch the darts on the Cups and stitch the Cups to the Front.
  4. Place the Back Facing on the Back, right sides together, and stitch along the upper edge, catching the Straps between them. Trim the seam allowances to 2–3 mm from the stitching. Turn the Back Facing to the wrong side, baste and press.
  5. Stitch the side seams with the Back Facing folded out. Press the seam allowances towards the Back. Fold under the short ends of the Back Facing and sew them to the seam allowances. Topstitch the lower edge of the Back Facing to the Back.
  6. Fold the Straps in half lengthwise, right sides together, and stitch along the long edge. Turn right side out, baste and press. Sew the front ends under the corners of the Cups. Try on the dress, adjust the length of the Straps and sew their back ends under the upper edge of the Back.
  7. Measure the length of the lower edge of the dress. Cut this length from the lace strip and stitch it into a ring. Place the lace on the lower edge of the dress, right sides together, with the scalloped edge pointing up, and stitch. Turn the lace down and press the seam allowance up. Topstitch the seam allowance to the dress close to the lace.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?