Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5038
#5040

Shaped V-Neck Gown with Two Sleeve Options

Pattern #5039

A women's floor-length gown with a fitted long bodice shaped by front princess seams and back darts, a shaped V-neckline, a choice of two sleeves (long set-in sleeves or sleeves with a flounce) and a full skirt gathered into a low seam that dips to a point at the centre front. Fully lined, with a zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: medium-weight dress fabrics with body that hold a full skirt: silk taffeta, duchess satin, satin, brocade, jacquard, velvet or dense crepe.

Tech. Description

Shaped V-Neck Gown with Two Sleeve Options

A women's floor-length gown with a fitted long bodice shaped by front princess seams and back darts, a shaped V-neckline, a choice of two sleeves (long set-in sleeves or sleeves with a flounce) and a full skirt gathered into a low seam that dips to a point at the centre front. Fully lined, with a zipper in the centre back seam.

When To Wear

  • Evening receptions, formal dinners and balls.
  • As a guest at a wedding or a winter celebration: long sleeves and full length.

Key Design Features

Silhouette: Close-fitting long bodice over the hips and a full gathered skirt that falls to the floor.

Length: Floor length.

Neckline: Shaped V-neckline with softly curved sides at the front, finished with interfaced front and back neckline facings and the bodice lining.

Sleeves: Two options included. A: long, narrow set-in sleeves with eased sleeve caps, lined. B: set-in sleeves ending just below the elbow with a circular flounce that falls to the wrist on the outer arm and is shorter on the inner arm; the sleeves are lined, the flounce is single-layer with a narrow hem.

Front: Bodice cut in a centre front and two side fronts joined by princess seams; the front skirt is one piece cut on the fold.

Back: Two back bodice pieces with darts and two back skirt pieces; centre back seam with a zipper inserted between the folded seam allowances and topstitched close to the edge.

Waist: Dropped waist: the skirt is gathered into a seam that lies about 15 cm below the natural waist at the sides and back and dips to a V-point at the centre front.

Finishing: Turned-up, stitched hem.

Lining: Full lining cut from the same bodice, sleeve and skirt pieces; bodice and lining stitched together along the neckline and turned; the waist seam allowances of the main fabric and the lining are tacked together.

Level Of Difficulty

Intermediate. Princess seams, a full skirt gathered into a pointed waist seam, a bagged full lining and a zipper set in a lined centre back seam.

Fabric Recommendations

Medium-weight dress fabrics with body that hold a full skirt: silk taffeta, duchess satin, satin, brocade, jacquard, velvet or dense crepe.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (front and back neckline facings)
  • Zipper for the centre back seam

Cutter's Must

From main fabric:

  • Center Front – 1 piece
  • Side Front – 2 pieces
  • Back – 2 pieces
  • Sleeve (option A) – 2 pieces
  • Sleeve B (option B) – 2 pieces
  • Sleeve Flounce (option B) – 2 pieces
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece
  • Back Skirt – 2 pieces
  • Front Skirt – 1 piece on the fold

From fusible interfacing:

  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

From lining:

  • Center Front – 1 piece
  • Side Front – 2 pieces
  • Back – 2 pieces
  • Sleeve (option A) – 2 pieces, or Sleeve B (option B) – 2 pieces
  • Back Skirt – 2 pieces
  • Front Skirt – 1 piece on the fold
  • Note: the Front Skirt is very wide. Cut on the fold, it needs fabric about 260–280 cm wide, depending on your size. On standard 140–150 cm fabric, cut it as two halves: add a seam allowance along the fold line of each half and join the halves with a centre front seam. Cut the lining Front Skirt the same way.

Sewing Instructions

  1. Fuse interfacing to the Front Neckline Facing and the Back Neckline Facings. Finish the lower (inner) edges of the facings. Place the facings on the right side of the lining Center Front and lining Backs, neckline edges matching, and edgestitch the lower edges of the facings to the lining.
  2. Stitch the darts on the Backs in main fabric and lining.
  3. Stitch the princess seams (Center Front to Side Fronts), the shoulder seams and the bodice side seams in main fabric and lining. Press the seams open.
  4. Option A: stitch the sleeve seams in main fabric and lining. Set the main fabric sleeves into the main fabric armholes and the lining sleeves into the lining armholes, easing in the sleeve caps. Option B: stitch the short ends of each Sleeve Flounce together and finish its lower edge with a narrow hem. Stitch the sleeve seams of Sleeve B in main fabric and lining. Pin the flounce to the lower edge of the main fabric sleeve, right sides together, matching the flounce seam to the sleeve seam and the centre notches, and baste. Place the lining sleeve over it, right sides together, stitch along the lower edge and turn the lining to the inside. Set the main fabric sleeves into the main fabric armholes and the lining sleeves into the lining armholes, easing in the sleeve caps.
  5. If the Front Skirt was cut in two halves, stitch its centre front seam first. Stitch the skirt side seams in main fabric and lining.
  6. Run two rows of gathering stitches along the upper edge of the main fabric skirt. Pin the skirt to the lower edge of the main fabric bodice, matching the side seams, the centre front point and the centre back edges. Pull up the gathers evenly and stitch. Clip the skirt seam allowance at the centre front point. Press the seam allowances towards the bodice. Gather and attach the lining skirt to the lining bodice the same way.
  7. Stitch the centre back seam of the main fabric from the zipper mark down to the hem. Turn the seam allowances above the mark inwards, insert the zipper between them and topstitch close to the edge.
  8. Place the lining on the main fabric bodice right sides together and stitch along the neckline. Trim and clip the seam allowances, understitch the lining and turn it to the inside.
  9. Stitch the centre back seam of the lining from the zipper mark down to the hem. Turn under the lining seam allowances along the zipper and slipstitch them to the zipper tape.
  10. Tack the waist seam allowances of the main fabric and the lining together.
  11. Option A: turn up the sleeve hems of the main fabric and stitch them. Turn under the lower edges of the lining sleeves and slipstitch them to the sleeve hems. (Option B: the sleeve hems were finished in step 4.)
  12. Hem the main fabric skirt with a turned-up, stitched hem. Hem the lining skirt separately, 2–3 cm shorter than the main fabric, and connect the two hems at the side seams with thread chains.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?