Hooded Sweatshirt
Introducing a hooded sweatshirt sewing pattern for the modern hoodie – Casual Structure with Sporty Utility.
When To Wear
This hoodie offers both comfort and clean lines, making it suitable for casual streetwear, active lifestyles, or laid-back days:
- Weekend Errands: Perfect for layering over a tee or thermal base during cooler days.
- Outdoor Adventures: The high collar hood and fitted cuffs provide protection and warmth.
- Sporty Urban Style: a minimalistic yet structured piece for contemporary city wear.
Key Design Features
Silhouette: Relaxed fit with shaped side panels for subtle contouring.
Collar & Hood: High wrap hood with drawstring channel and overlap for extra wind protection.
Closure: Pullover style with no center front zipper.
Details:
- Raglan-style sleeves with a shoulder yoke for comfortable movement.
- Two vertical welt pockets on the front.
- Drawstring hood with eyelets and topstitched construction details.
Cuffs & Hem: Ribbed or self-fabric bands for a snug fit.
Style: Sporty and practical with clean, modern shaping and a utilitarian feel.
Level Of Difficulty
Intermediate level. Requires basic experience working with knits and understanding of topstitching and elastic seams.
Fabric Recommendations
Best suited for knit fabrics with low stretch:
- Low-stretch knits made from natural or blended fibers, such as French terry or cotton sweatshirting
Avoid high-stretch or drapey knits, as they will distort the garment’s structured lines.
Additional Supplies
- 2 metal grommets (eyelets)
- 2 cord stoppers
- Drawstring cord for the hood
Cutter’s Must
From Main Fabric:
- Back – 1 piece on fold
- Center Front – 1 piece on fold
- Side Front – 2 pieces
- Yoke – 2 pieces
- Hood – 4 pieces
- Off-Set Welt – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- Placket (hem band) – 1 piece on fold
- Pocket Bag – 4 pieces
Important Information
Before cutting your fabric:
- Print and lay out pattern pieces to determine yardage.
- Check mirrored pieces, notches, and grainlines.
- For patterned fabrics, align carefully for symmetry.
Assembly Instructions
1. Pocket Welt
- Fold the off-set welt lengthwise in half, right sides together, and stitch across the ends.
- Turn the welt right side out, shape the corners neatly, and press.
- Place the welt on the side front according to the markings and topstitch its ends.
2. Pocket Bags
- Attach the pocket bags at the pocket opening according to the pattern markings.
3. Front Panel Seams
- Stitch the center front to the side fronts.
- Press seam allowances toward the center and overlock.
4. Sleeve Yoke
Stitch the yoke to the sleeve, press seam allowances toward the yoke, and overlock.
5. Sleeve and Body Assembly
- Attach the sleeves to the back; press seam allowances toward the back and overlock.
- Attach the sleeves to the front; press seam allowances toward the front and overlock.
6. Side and Sleeve Seams
- Stitch the side seams together with the sleeve seams in one continuous line.
- Press seam allowances and overlock.
7. Hood
- Stitch the hood pieces in pairs.
- On the outer hood, set the eyelets at the marked positions.
- Place the two hoods right sides together and stitch around the outer edge.
- Clip seam allowances along curved areas, turn right side out, shape, and press.
- Topstitch along the marked line to form a drawstring casing.
- Overlap the right hood over the left and baste or stitch together along the lower edge.
8. Attach Hood
- Sew the hood into the neckline.
- Press seam allowances upward and overlock.
9. Cuffs
- Stitch each cuff into a ring and press seam allowances open.
- Fold the cuff in half lengthwise, wrong sides together, and press.
- Attach the cuff to the sleeve hem, slightly stretching it to match.
- Press seam allowances upward and overlock.
10. Lower Band
- Stitch the placket (hem band) into a ring and press seam allowances open.
- Fold the band in half lengthwise, wrong sides together, and press.
- Attach the band to the garment’s lower edge, stretching it evenly.
- Press seam allowances upward and overlock.
11. Finishing
Thread the cord through the hood casing and secure the cord stoppers.
Tip: Ready-made ribbed cuffs and waistband can also be used instead of self-fabric pieces.
