Short Sleeve Quilted Stand Collar Jacket

Name: Short Sleeve Quilted Stand Collar Jacket
Brand: Minerva Patterns
SKU: 4799
Price: 5.00 EUR
Availability: InStock

Pattern #4799

A women's hip-length padded jacket with short sleeves, a stand collar, a bottom band and single-welt pockets, quilted at 6–8 cm intervals and closed with a full-length front zip. Fully lined. Drafted to your own measurements. Recommended fabric: jacket fabrics of natural or blended fibres.

Tech. Description

Short Sleeve Quilted Stand Collar Jacket

A women's hip-length padded jacket with short sleeves, a stand collar, a bottom band and single-welt pockets, quilted at 6–8 cm intervals and closed with a full-length front zip. Fully lined.

When To Wear

In cool spring and autumn weather, over a long-sleeved top or knit.
For everyday wear with jeans or trousers.

Key Design Features

Silhouette: Straight, loose body with horizontal quilting lines.

Length: Hip length, finished with a bottom band.

Collar: Padded stand collar, outer and inner stand sewn into the neckline of the jacket and of the facings.

Sleeves: Short set-in sleeves, padded and quilted, with turned-up hems.

Closure: Full-length zip set between the front edge and the facing.

Pockets: Single-welt pockets low on the fronts, with lining pocket bags.

Back: One piece cut on the fold, no centre back seam.

Finishing: Synthetic padding is laid under the outer fabric of the body, sleeves, stand and band, then quilted with horizontal rows every 6–8 cm. Welts and bottom band can be cut from knit fabric for a closer fit.

Lining: Full lining including sleeves, sewn to the facings, the band and the sleeve hems.

Level Of Difficulty

Intermediate. Quilting through padding, welt pockets, a zip set between front and facing, a bottom band and a bagged lining.

Fabric Recommendations

Jacket fabrics of natural or blended fibres. Knit fabric can be used for the welts and the bottom band.

Additional Supplies

Lining fabric
Synthetic padding (wadding)
Front zip

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: All seams 1 cm, sleeve hem allowance – 3 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). Attention! For a better fit, knit fabric can be used for the welt and lower placket details.

From main fabric:
- Back – 1 piece with fold
- Front – 2 pieces
- Sleeve — 2 pieces
- Collar stand – 2 pieces
- Back neckline facing – 1 piece
- Front facing – 2 pieces
- Welt – 2 pieces
- Lower placket – 1 piece
From synthetic batting:
- Back – 1 piece with fold
- Front – 2 pieces
- Sleeve — 2 pieces
- Collar stand – 1 piece
- Lower placket – 1 piece
From lining fabric:
- Back – 1 piece with fold
- Front – 2 pieces
- Sleeve — 2 pieces
- Large pocket bag - 2 pieces
- Small pocket bag - 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! Try to observe the grain line direction.

Place synthetic batting pieces on the wrong side of the main fabric pieces and secure along the contour. Then treat as one piece. Stitch decorative lines every 6-8 cm on the front and back, securing the top to the batting. Stitch decorative-securing lines on the sleeve.
Press the welt lengthwise in half, wrong sides together. Stitch the small pocket bag to the inner side of the welt. Attach the welt to the front along the lower pocket marking line. Stitch the front facing to the large pocket bag, folding the long edge inward. Attach the large pocket bag to the front along the upper pocket marking line. The ends of the stitches should finish at the short marking lines. Cut the pocket opening. Make diagonal cuts 1-1.5 cm from the end of the pocket. Turn the welt and large pocket bag to the wrong side through the opening. Secure the pocket ends from the wrong side with a double backstitch at the base of the corners. Stitch and overlock the pocket bag edges.
Stitch and press open the shoulder seams of the jacket. Set in the sleeves.
Stitch and press open the side seam simultaneously with the sleeve seam.
Attach the outer collar stand to the neckline. Clip and press open the allowances. Attach the outer lower placket. Press the allowances upwards.
Stitch the shoulder seams of the front facings and neckline facing. Press open the allowances. Attach the inner collar stand to the neckline. Clip and press open the allowances. Attach the inner side of the placket to the front facings. Press the allowances upwards.
Place the front facing on the right side of the front, right side down, and stitch along the edge, inserting the zipper, simultaneously stitching the collar.
On the lining fabric pieces, stitch the seams, leaving an opening in the left side seam. Set in the sleeves.
Secure the allowances of the collar stand attachment to the neckline. Attach the lining to the front facings and neckline facing. Attach the lower edge of the lining to the upper edge of the placket. Attach the lining to the sleeve hem. Turn right side out.