Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's dress with a high funnel neck shaped by neckline darts, a waist seam, a flared skirt below the knee and a concealed zip in the centre back seam. Two sleeve versions: a flared one-piece sleeve, or a two-piece sleeve with a turn-back cuff. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.
A women's dress with a high funnel neck shaped by neckline darts, a waist seam, a flared skirt below the knee and a concealed zip in the centre back seam. Two sleeve versions: a flared one-piece sleeve, or a two-piece sleeve with a turn-back cuff.
Silhouette: Fitted bodice joined at the waist to a flared skirt.
Length: Below the knee.
Neckline: High funnel neck cut in one with the bodice, shaped by darts into the neckline on the upper front and upper back, and finished with an interfaced facing; there is no separate collar.
Sleeves: Set-in, with the cap eased into the armhole. Version 1: a two-piece sleeve (upper and lower sleeve) of about three-quarter length with an interfaced turn-back cuff. Version 2: a one-piece flared sleeve of elbow length with a topstitched hem.
Front: Upper front in one piece; lower front cut on the fold, with no centre front seam.
Back: Upper and lower back each cut in two halves, with a centre back seam and a concealed zip.
Waist: Seam joining the upper and lower parts, allowances pressed upwards.
Finishing: Seams overlocked; hem pressed 1.2 cm to the wrong side and topstitched.
Intermediate. Neckline darts, a concealed zip, a neckline facing joined to the zip tape, set-in sleeves with an eased cap and, in version 1, a turn-back cuff.
Dress fabrics of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; hem allowance of the dress – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From fusible interfacing:

#4789
Sleeveless Lapel Collar Wrap Dress

#4788
Sleeveless Notched Collar Asymmetric Wrap Dress

#4786
Button Front Shirtdress Gathered Waist
#4785
Sleeveless Racerback Blouson Dress
#4784
Inverted Pleat tunic

#4800
V-Neck Three-Quarter Sleeve Belted Dress

#4778
Asymmetrical Wrap Flared Dress

#4806
Contoured Seam Three-Quarter Sleeve Dress

Minerva Support
Online