FABRIC RECOMMENDATIONS: well-draping double-sided dress fabrics made from natural or blended fibers. YOU ALSO NEED: a decorative fastener.
CUTTER'S MUST
IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm; hem allowance - 2.5 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical details).
- From main fabric:
- Back - 1 piece on fold
- Front - 2 pieces
- Back ruffle – 2 pieces
- Front ruffle - 2 pieces
- Back lining – 1 piece
- Front lining - 2 pieces
Sewing Instructions
WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH! ATTENTION! THE MODEL IS MADE WITHOUT A BUST DART AND IS NOT RECOMMENDED FOR SIZES WITH A BUST CIRCUMFERENCE > 100 cm!
- Serge the center edges of the front separately. Stitch the center seam of the front from the mark to the bottom edge, press seams open.
- Stitch the side seams, press seams towards the back and serge.
- Stitch the side seams of the ruffles, press seams open and serge. Serge the outer edge with a narrow rolled hem or finish with a "Moscow" seam.
- Clip the front ruffle at the mark. Place the ruffles on the garment and secure along the edges.
- Stitch the shoulder seams, press seams open.
- Stitch the side, shoulder, and center front seams on the lining pieces. Press seams open and serge. Serge the bottom edge.
- Place the lining with the main garment and stitch the neckline edge and the front opening, inserting the decorative fastener. Clip allowances at curves. Turn the garment right side out, press. Stitch the armhole in two steps: first the front, then the back.
- Serge the bottom edge, press to the wrong side and topstitch.
