Raglan Funnel Neck Asymmetrical Zipper Wrap Sweatshirt

Name: Raglan Funnel Neck Asymmetrical Zipper Wrap Sweatshirt
Brand: Minerva Patterns
SKU: 4751
Price: 5.00 EUR
Availability: InStock

Pattern #4751

A women's hip-length knit top with an asymmetric wrap front: the right front crosses over the left in a curved edge. Raglan sleeves, a tall funnel collar stand, a diagonal zipper at the left raglan seam and pockets set behind the lower fronts. Drafted to your own measurements. Recommended fabric: knit fabric with low stretch, from natural or blended fibres.

Tech. Description

Raglan Funnel Neck Asymmetrical Zipper Wrap Sweatshirt

When To Wear

In autumn and spring with jeans, leggings or knit trousers.
For walks, travel and other casual days.

Key Design Features

Silhouette: Semi-fitted; cut without a bust dart, so it works better for a smaller bust.

Length: Hip length, with a curved overlapping front hem.

Collar: Funnel collar stand cut double, set into the neckline and closed at the front edges.

Sleeves: Long raglan sleeves cut in two parts (front and back) with a seam along the top of the arm.

Front: Right and left fronts faced together at the neckline and treated as one layer; zipper set into the left front raglan seam.

Pockets: Pocket bags topstitched to the inside of the fronts along a curved line, with openings at the side seams turned under and topstitched.

Back: One piece cut on the fold.

Finishing: Front, back and sleeve hems turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Sewing knit fabric, an asymmetric layered front, a zipper in a raglan seam, topstitched pocket bags and a double collar stand.

Fabric Recommendations

Knit fabric with low stretch, from natural or blended fibres.

Additional Supplies

Zipper

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Seam allowance on the left and right front pieces at the pocket opening – 2 cm. Seam allowance at the bottom edges of the back, front pieces, and sleeve – 2.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:
- Back – 1 piece on fold
- Right Front – 1 piece
- Left Front – 1 piece
- Back Sleeve – 2 pieces
- Front Sleeve – 2 pieces
- Stand Collar – 2 pieces
- Pocket Bag – 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! The model is made without a bust dart! Therefore, it is not recommended for larger sizes! Attention! Markings on the patterns are made on the right side!

Serge the side and inner edges of each Pocket Bag. Clip the side seam allowances of the Left Front and Right Front at the marks. Press the pocket opening allowance under twice by 1 cm and topstitch. Lay each front onto its Pocket Bag and topstitch along the marked line.
Serge the bottom edges of the Right Front and Left Front, press to the wrong side and topstitch. Place the Right Front right side against the wrong side of the Left Front and stitch the neckline edge. Clip the allowances, turn the pieces right side out, tack together along the open edges and treat as one piece from here on.
Stitch the Back Sleeves to the Back, press allowances towards the back and serge.
Stitch the upper edges of the Front Sleeves and Back Sleeves, press allowances towards the back and serge.
Set the outer Stand Collar into the neckline, press allowances towards the collar.
Stitch the right Front Sleeve to the Right Front, press allowances towards the front and serge. Stitch the left Front Sleeve to the Left Front from the mark to the side edge, clip the allowances at the mark, press open and serge. Insert the zipper into the open part of this seam.
Stitch the side seams together with the sleeve seams in one go, press allowances towards the back and serge.
Serge the bottom edge of the inner Stand Collar. Place the inner Stand Collar on the outer one right sides together and stitch the side edges and the upper edge. Trim the allowances at the corners, turn the collar right side out, press. Stitch the inner Stand Collar down in the seam line of the outer Stand Collar.
Serge the bottom edge of the Back, press to the wrong side and topstitch. Serge the bottom edges of the Sleeves, press to the wrong side and topstitch.