Shawl Collar Wrap Coat with Tie Belt

Name: Shawl Collar Wrap Coat with Tie Belt
Brand: Minerva Patterns
SKU: 4701
Price: 5.00 EUR
Availability: InStock

Pattern #4701

A knee-length women's wrap coat in thin coating, with a shawl collar cut in one with the fronts, set-in sleeves, in-seam side pockets and a tie belt. Front edges and collar are finished with facings; the coat is unlined. Drafted to your own measurements. Recommended fabric: thin coating from natural or blended fibres.

Tech. Description

Shawl Collar Wrap Coat with Tie Belt

When To Wear

In spring and early autumn over dresses or trousers with a fine knit.
As a light belted coat for town and office.

Key Design Features

Silhouette: Straight wrap shape, drawn in at the waist by the belt.

Length: Around knee length.

Collar: Shawl collar cut in one with the fronts, joined at the centre back and set into the neckline together with the shoulder seams; the under side is formed by the front facings and back neck facing.

Sleeves: Long set-in sleeves with one seam; hems turned up 3 cm and blind-stitched.

Closure: No buttons; the fronts wrap and are held by a tie belt.

Front: Darts on the fronts; front edges, collar edge and hem are bagged out with the front facings.

Pockets: Pockets set into the side seams, with pocket bags in lining fabric.

Back: Centre back seam.

Waist: Separate tie belt, topstitched 0.7 cm from the edge all round.

Finishing: Hem turned up 3 cm and blind-stitched; seams overlocked.

Level Of Difficulty

Intermediate. A shawl collar set with the shoulder seams and faced with a separate facing collar, in-seam pockets, set-in sleeves and blind-stitched hems.

Fabric Recommendations

Thin coating from natural or blended fibres.

Additional Supplies

Lining fabric for the pocket bags

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the garment bottom and sleeve hem – 3.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Back – 2 pieces
- Front – 2 pieces
- Front facing – 2 pieces
- Sleeve – 2 pieces
- Back neckline facing – 1 piece
- Belt – 1 piece
From lining fabric:
- Pocket bag – 4 pieces

Sewing Instructions

Stitch the center back seam, press allowances open, overlock.
Stitch the darts on the front pieces. Press dart excess towards the center.
Clip the front allowance at the corner near the shoulder seam. Stitch the collar seam, press allowance open. Stitch shoulder seams, simultaneously setting the collar into the neckline.
Attach pocket bags to the back and front. Stitch side seams simultaneously with the pocket bag, press allowances towards the back and overlock.
Stitch shoulder seams of front facings and neckline facing, clipping allowances at corners. Stitch the collar seam. Set the collar into the neckline, press allowances open. Overlock the outer edge.
Fold the front facing with the front, right sides together, and stitch around the collar edge, front edge, and bottom edge. Secure the collar attachment allowances together.
Stitch the sleeve seam, press allowances towards the elbow and overlock. Set sleeves into armholes according to notches, press allowances and overlock.
Overlock the bottom edge of the garment and sleeves, press to the wrong side and hem with blind stitches.
Fold the belt piece in half lengthwise, right sides together, and stitch along the long side and one short side. Turn the belt right side out, turn in the allowances of the unstitched section, and topstitch 0.7 cm from the edge around the perimeter of the belt.