Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4509
#4511

Sheath Dress Illusion Yoke Gathered Sleeves

Pattern #4510

A knee-length women's sheath dress with a two-part front yoke: a narrow band of dress fabric at the neckline and a chiffon section below it with a curved V-shaped lower edge. Three-quarter chiffon sleeves gathered into buttoned cuffs, princess seams and a back vent. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres for the dress; chiffon for the lower yoke section and the sleeves.

Tech. Description

Sheath Dress with Illusion Yoke and Gathered Sleeves

A knee-length women's sheath dress with a two-part front yoke: a narrow band of dress fabric at the neckline and a chiffon section below it with a curved V-shaped lower edge. Three-quarter chiffon sleeves gathered into buttoned cuffs, princess seams and a back vent.

When To Wear

  • At the office in spring and autumn, with court shoes.
  • For dinners, receptions and family celebrations.

Key Design Features

Silhouette: Fitted sheath shaped by princess seams: on the front they run from the yoke to the hem, on the back from the armhole to the hem.

Length: Knee length.

Neckline: Round neckline finished with a facing.

Front: Yoke in two parts: an opaque upper band joined to a sheer chiffon section, which is sewn to the dress along a curved V line.

Sleeves: Three-quarter set-in sleeves in chiffon, gathered at the lower edge into a cuff with an extension, fastened with one button. A short opening in the sleeve seam above the cuff.

Closure: Invisible zipper in the centre back seam.

Back: Centre back seam, two princess seams and a lapped vent at the hem, interfaced and secured with machine stitching on the right side.

Finishing: Seams overlocked; hem turned up and sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Joining chiffon to dress fabric, a back vent, an invisible zipper with a facing, and gathered sleeves set into cuffs.

Fabric Recommendations

Dress fabrics in natural or blended fibres for the dress; chiffon for the lower yoke section and the sleeves.

Additional Supplies

  • Chiffon
  • Invisible zipper
  • Fusible interfacing (cuffs, neckline facings, vent)
  • 2 buttons

Cutter's Must

From main fabric:

  • Back center - 2 pieces
  • Back side - 2 pieces
  • Front side - 2 pieces
  • Front center - 1 piece
  • Front yoke_1 - 1 piece
  • Cuff – 2 pieces
  • Back neckline facing – 2 pieces
  • Front neckline facing – 1 piece

From chiffon:

  • Front yoke_2 - 1 piece
  • Sleeve — 2 pieces

From fusible interfacing:

  • Cuff – 2 pieces
  • Front neckline facing – 1 piece
  • Back neckline facing – 2 pieces

Sewing Instructions

  1. Fuse fusible interfacing to the respective pieces.
  2. Stitch the back princess seams, press seam allowances towards the center, and serge.
  3. On the left back, along the vertical slit edge, trim 5 cm. On both back pieces, fuse the slit from the wrong side. On the right side, mark the center seam line (slit fold line). Press the left piece along the slit fold line; on the right piece, press only the seam allowance of the right side of the slit (6 cm) to the wrong side. Align the pieces along the center seam and secure at the upper edge of the slit. Serge the center edge of the back separately on each piece. Serge the slit seam allowances. Stitch the center edge of the back from the mark to the slit corner. Clip the slit seam seam allowance corner on the right piece. Press the center seam seam allowances open, press the slit seam allowances and secure them on the right side with machine stitching. Insert the zipper.
  4. Stitch the front princess seams, press seam allowances towards the center, and serge.
  5. Stitch front yoke_1 to front yoke_2, press seam allowances upwards and serge. Stitch front yoke_2 to the front, press seam allowances downwards and serge.
  6. Stitch the side and shoulder edges, press seam allowances towards the back and serge.
  7. Stitch the shoulder seams of the facings, press seam allowances open. Serge the outer edge. Place the dress with the facing right sides together, aligning the neckline edges. Before reaching 5 mm from the edges of the concealed fastener, fold back the facing and pin it to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin them to the neckline edge over the facing. Stitch the neckline edge, clip the seam allowances at curves, turn the pieces right side out and press. Secure the facing to the zipper tape.
  8. Serge the sleeve edges separately. Stitch the sleeve seam from the slit mark upwards, press seam allowances open, pressing the slit. Stitch a securing line along the slit 0.2 cm from the edge. Set the sleeves into the armholes, matching the notches. Press and serge the seam allowances. Along the lower edge of the sleeve, stitch with a loosened upper thread and gather.
  9. Fold the cuff in half lengthwise, right sides together, and stitch the cuff edges and the step. Clip the seam allowance at the mark. Turn right side out and press. Attach the outer side of the cuff to the sleeve. Fold the inner side's seam allowance inwards and topstitch into the seam of the outer side's attachment. Make buttonholes and sew on buttons.
  10. Serge the hem seam allowance of the dress, press to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?