Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4508
#4510

Strap Top with Notched Collar

Pattern #4509

A women's fitted sleeveless top on narrow straps, with an overlapping front fastened by a button and a notched collar sewn to the front edges. Princess seams front and back; fully lined. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.

Tech. Description

Strap Top with Notched Collar

A women's fitted sleeveless top on narrow straps, with an overlapping front fastened by a button and a notched collar sewn to the front edges. Princess seams front and back; fully lined.

When To Wear

  • In summer with tailored trousers or a pencil skirt, for the office or a dinner.
  • Under a jacket of the same fabric as part of a suit.

Key Design Features

Silhouette: Close-fitting, shaped by princess seams on the front and back.

Length: Hip length; the front edge of the overlapping side runs down at an angle to the hem.

Collar: Notched collar standing up above the neckline, made of separate collar pieces sewn to the fronts and lined with interfaced collar pieces.

Front: Asymmetric overlap fastened at waist level; two buttons in all, one of them on the outside.

Back: Centre back seam and two princess seams; straight neckline.

Finishing: Narrow straps made from a 6 cm strip folded in four and edge-stitched at 0.2 cm, caught in the seam between the outer fabric and the lining.

Lining: Back and side panels lined; the fronts are faced with interfaced inner centre fronts. All edges, including the hem, are bagged out and the top is turned through an opening in the left side seam of the lining.

Level Of Difficulty

Intermediate. Princess seams, a collar sewn to the front edge, and bagging the whole top with its lining in one seam with the straps inserted.

Fabric Recommendations

Dress fabrics in natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (inner centre fronts, collar pieces)
  • 2 buttons

Cutter's Must

From main fabric:

  • Center front - 4 pieces
  • Side - 2 pieces
  • Back side – 2 pieces
  • Center back – 2 pieces
  • Collar piece – 4 pieces
  • Straps – 2 strips 6 cm wide

From lining fabric:

  • Center back - 2 pieces
  • Back side - 2 pieces
  • Front side - 2 pieces

From fusible interfacing:

  • Center front – 2 pieces
  • Collar piece – 4 pieces

Sewing Instructions

  1. Fuse fusible interfacing to the inner center front and collar pieces.
  2. Stitch the princess seams on the back, press the seam allowances towards the center. Stitch the center back seam. Press the seam allowance open.
  3. Stitch the princess seams on the front pieces, press the seam allowances towards the center. Stitch the side seams. Press the seam allowances open. Attach the collar piece to the front. Press the seam allowance open.
  4. Cut a trim strip 6 cm wide. Fold in half lengthwise and press. Fold the outer edges towards the center and press again. Stitch the folds along the strap 0.2 cm from the edge.
  5. Stitch the lining pieces similarly to the main pieces, leaving an opening in the left side seam. Attach the inner front and inner collar piece.
  6. Place the main and lining pieces right sides together and stitch along the contour, inserting the straps. Turn right side out through the opening. Close the opening.
  7. Make buttonholes on the front panels and sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?