Crossover Sheath Dress with Wide Collar and Short Sleeves
A knee-length women's sheath dress with a wide neckline framed by a three-part collar that crosses over on the front. The right front is pleated towards the side, the bodice is joined to the skirt by a waist seam, and the back has a zipper and a vent.
When To Wear
- At receptions, dinners and family celebrations.
- At the office in cooler months under a jacket or with a shawl over the shoulders.
Key Design Features
Silhouette: Fitted sheath, shaped by back darts and the front panel seams.
Length: Knee length.
Collar: Wide double-layer collar in three parts (back, right and left), interfaced; the left part lies under the right front, the right part is folded and fixed along the front panel seam, so the collar crosses over the bodice.
Front: Right front with pleats turned downwards, a side front panel, a left front underneath and a lower front joined at the waist.
Sleeves: Short set-in sleeves with an eased cap.
Back: Centre back seam with darts pressed towards it.
Closure: Concealed zipper in the centre back seam.
Finishing: Back vent with a 6 cm allowance, fused and topstitched; dress hem 2 cm, blind-stitched by hand; sleeve hems 2 cm, topstitched.
Level Of Difficulty
Intermediate. A multi-part crossover collar, pleats, a back vent combined with a concealed zipper, and set-in sleeves.
Fabric Recommendations
Dress fabrics from natural or blended fibres with added elastane.
Additional Supplies
- Concealed zipper
- Fusible interfacing (collar pieces, back vent)
Cutter's Must
From main fabric:
- Back - 2 pieces
- Right front – 1 piece
- Left front – 1 piece
- Side – 1 piece
- Lower front - 1 piece
- Back collar – 2 pieces
- Right collar – 2 pieces
- Left collar – 2 pieces
- Sleeve - 2 pieces
From fusible interfacing:
- Back collar – 1 piece
- Right collar – 1 piece
- Left collar – 1 piece
Sewing Instructions
- Fuse fusible interfacing to the corresponding pattern pieces.
- Stitch darts on the back pieces. Press darts towards the center seam.
- On the left lower back, cut 5 cm along the vertical slit edge. On both lower back pieces, fuse the slit from the wrong side. On the right side, mark the center seam line (slit fold line). Press the left along the slit fold line; on the right, press only the right slit seam allowance (6 cm) to the wrong side. Align the pieces along the center seam and secure at the upper slit edge. Overlock the center edge of the back separately on each piece. Overlock the slit seam allowances. Stitch the center edge of the back from the neckline to the first notch and from the second notch to the slit corner. Clip the corner of the slit seam allowance on the right. Press the center seam seam allowances open, press the slit seam allowances and secure them on the right side with machine stitching. Insert the zipper.
- Stitch the shoulder edges of the collar pieces, press seam allowances open. Fold the upper and lower collar right sides together and stitch the outer edge. Clip the seam allowances, turn the collar to the right side, straighten, and press.
- Form and secure pleats on the right front (depths directed downwards). Stitch shoulder edges, press seam allowances towards the back and overlock.
- Attach the lower collar to the neckline, press seam allowances towards the collar. Turn the lower edge of the upper collar inwards and topstitch into the seam of the lower collar attachment. Fold the left collar onto the front, overlock the lower edge of the left front together with the collar. Place the right front over the left and topstitch into the collar attachment seam.
- Fold the right collar in half, align the fold with the notch, and secure the collar along the relief with the front. Attach the side to the right front, press seam allowances towards the side and overlock.
- Stitch the upper and lower front pieces. Press seam allowances upwards and overlock.
- Stitch the side edges, press seam allowances towards the back and overlock.
- Stitch the sleeve edge, press seam allowances and overlock. Attach the sleeves into the armhole, aligning the notches and easing the sleeve cap. Press seam allowances and overlock.
- Overlock the hem seam allowance of the dress, press to the wrong side and hem with blind stitches. Secure the slit seam allowance to the hem. Overlock the sleeve hem seam allowance, press to the wrong side and topstitch.