CUTTER'S MUST
- From main fabric:
- BACK PANEL - 2 QTY
- Right FRONT PANEL – 1 QTY
- Left FRONT PANEL – 1 QTY
- SIDE PANEL – 1 QTY
- Lower FRONT PANEL - 1 QTY
- Back COLLAR – 2 QTY
- Right COLLAR – 2 QTY
- Left COLLAR – 2 QTY
- SLEEVE - 2 QTY
- From FUSIBLE INTERFACING:
- Back COLLAR – 1 QTY
- Right COLLAR – 1 QTY
- Left COLLAR – 1 QTY
Sewing Instructions
- Fuse FUSIBLE INTERFACING to the corresponding pattern pieces.
- Stitch darts on the BACK PANEL pieces. Press darts towards the center seam.
- On the left lower BACK PANEL, cut 5 cm along the vertical slit edge. On both lower BACK PANEL pieces, fuse the slit from the wrong side. On the right side, mark the center seam line (slit fold line). Press the left part along the slit fold line; on the right part, press only the right slit SEAM ALLOWANCE (6 cm) to the wrong side. Align the pieces along the center seam and secure at the upper slit edge. Overlock the center edge of the BACK PANEL separately on each piece. Overlock the slit SEAM ALLOWANCES. Stitch the center edge of the BACK PANEL from the neckline to the first NOTCH and from the second NOTCH to the slit corner. Clip the corner of the slit seam allowance on the right part. Press the center seam SEAM ALLOWANCES open, press the slit SEAM ALLOWANCES and secure them on the right side with machine stitching. Insert the ZIPPER.
- Stitch the shoulder edges of the COLLAR pieces, press SEAM ALLOWANCES open. Fold the upper and lower COLLAR right sides together and stitch the outer edge. Clip the SEAM ALLOWANCES, turn the COLLAR to the right side, straighten, and press.
- Form and secure pleats on the right FRONT PANEL (depths directed downwards). Stitch shoulder edges, press SEAM ALLOWANCES towards the BACK PANEL and overlock.
- Attach the lower COLLAR to the neckline, press SEAM ALLOWANCES towards the COLLAR. Turn the lower edge of the upper COLLAR inwards and topstitch into the seam of the lower COLLAR attachment. Fold the left COLLAR part onto the FRONT PANEL, overlock the lower edge of the left FRONT PANEL together with the COLLAR. Place the right FRONT PANEL over the left and topstitch into the COLLAR attachment seam.
- Fold the right COLLAR part in half, align the fold with the NOTCH, and secure the COLLAR along the relief with the FRONT PANEL. Attach the SIDE PANEL to the right FRONT PANEL, press SEAM ALLOWANCES towards the side and overlock.
- Stitch the upper and lower FRONT PANEL pieces. Press SEAM ALLOWANCES upwards and overlock.
- Stitch the side edges, press SEAM ALLOWANCES towards the BACK PANEL and overlock.
- Stitch the SLEEVE edge, press SEAM ALLOWANCES and overlock. Attach the SLEEVES into the armhole, aligning the NOTCHES and easing the SLEEVE cap. Press SEAM ALLOWANCES and overlock.
- Overlock the hem SEAM ALLOWANCE of the dress, press to the wrong side and hem with blind stitches. Secure the slit SEAM ALLOWANCE to the hem. Overlock the SLEEVE hem SEAM ALLOWANCE, press to the wrong side and topstitch.
